JoeCustoms.com :: View topic - More 1/18 scale accessories from China

i saw those glasses at the same place as the cool clothes. i think they are die struck or maybe laser cut out. i say die struck because i can't think of another way to get that "ridge" on the aviator sunglasses @ the arm. having made some custom metal glasses i have to say these look much better and i'd never sell a pair of mine for that low a price. i'm tempted to get some.

for comparison here are most of the ones i've made. i wish i had better pics of a few of them. all labor heavy using brass,torch,, and silver solder. the only exceptions being the best pair i made (rughead) using steel wire and a laser welder ,and the worst (hickok) just nail heads jabbed into the head

i was looking for ball joints on ebay and stumbled on a over seas seller with a bunch of photo etched parts. i had forgotten about you suggesting that may be how they made the glasses. it looks like you were right!

https://www.ebay.com/itm/114856782584?s ... 2749.l2649
i took the plunge and ordered a set along with the joints i wanted. at $9 i figured i'd try them. new seller to me so here is hoping everything comes as advertised. i'll report back when they get here. i can't seem to find more on ebay but i googled and found another site with them for a few dollars more.

https://www.lightbringer.net/collection ... ass-frames
no exp with that seller either.

i'm excited to see if they are workable for 1:18.

they look pretty good in hand. both the 1:20 and 1:24 might work for 4" figures. i need to get some folded and on a figure.

Author:	johnwayne [ Mon Nov 15, 2021 1:19 pm ]
Post subject:	More 1/18 scale accessories from China
This guy has some more cool accessories. The metal glasses is a really cool idea, I wish I had thought of doing that before. https://www.ebay.com/sch/m.html?_nkw=&_armrs=1&_from=&_ssn=pkba1577&_ipg=200&rt=nc

Author:	MJTanner [ Mon Nov 15, 2021 1:34 pm ]
Post subject:	Re: More 1/18 scale accessories from China
Oh that's a cool idea for the glasses.

Author:	Mysterious Stranger [ Mon Nov 15, 2021 2:40 pm ]
Post subject:	Re: More 1/18 scale accessories from China
They have been doing the metal glasses in 1/6 scale for a while. Curious how the durability translates to 1/18 scale. The 1/6 are pretty thin so I wonder how easily they snap if you bend them too far/much.

Author:	2DARK2C [ Mon Nov 15, 2021 4:46 pm ]
Post subject:	Re: More 1/18 scale accessories from China
i saw those glasses at the same place as the cool clothes. i think they are die struck or maybe laser cut out. i say die struck because i can't think of another way to get that "ridge" on the aviator sunglasses @ the arm. having made some custom metal glasses i have to say these look much better and i'd never sell a pair of mine for that low a price. i'm tempted to get some. for comparison here are most of the ones i've made. i wish i had better pics of a few of them. all labor heavy using brass,torch,, and silver solder. the only exceptions being the best pair i made (rughead) using steel wire and a laser welder ,and the worst (hickok) just nail heads jabbed into the head.

Author:	chad_ghost [ Tue Nov 16, 2021 9:47 pm ]
Post subject:	Re: More 1/18 scale accessories from China
Whoa! Cool!

JoeCustoms.com https://joecustoms.com/forums/

More 1/18 scale accessories from China https://joecustoms.com/forums/viewtopic.php?f=10&t=48480	Page 1 of 2

Author:	johnwayne [ Wed Nov 17, 2021 12:41 am ]
Post subject:	Re: More 1/18 scale accessories from China
2DARK2C wrote: i saw those glasses at the same place as the cool clothes. i think they are die struck or maybe laser cut out. i say die struck because i can't think of another way to get that "ridge" on the aviator sunglasses @ the arm. having made some custom metal glasses i have to say these look much better and i'd never sell a pair of mine for that low a price. i'm tempted to get some. for comparison here are most of the ones i've made. i wish i had better pics of a few of them. all labor heavy using brass,torch,, and silver solder. the only exceptions being the best pair i made (rughead) using steel wire and a laser welder ,and the worst (hickok) just nail heads jabbed into the head I was thinking photo etched brass could be done

Author:	2DARK2C [ Wed Nov 17, 2021 9:19 am ]
Post subject:	Re: More 1/18 scale accessories from China
i'm not familiar with that, but i'll def. look into it. it would be great to find a scrapbook cutter or some kind of metal cutter in the shape of glasses. i'm going to attempt silver soldering with a butane torch at home. losing access to a torch and laser stopped my quest to make better glasses.

Author:	2DARK2C [ Tue Jan 04, 2022 8:15 pm ]
Post subject:	Re: More 1/18 scale accessories from China
i was looking for ball joints on ebay and stumbled on a over seas seller with a bunch of photo etched parts. i had forgotten about you suggesting that may be how they made the glasses. it looks like you were right! https://www.ebay.com/itm/114856782584?s ... 2749.l2649 i took the plunge and ordered a set along with the joints i wanted. at $9 i figured i'd try them. new seller to me so here is hoping everything comes as advertised. i'll report back when they get here. i can't seem to find more on ebay but i googled and found another site with them for a few dollars more. https://www.lightbringer.net/collection ... ass-frames no exp with that seller either. i'm excited to see if they are workable for 1:18.

Author:	johnwayne [ Wed Jan 05, 2022 2:24 am ]
Post subject:	Re: More 1/18 scale accessories from China
2DARK2C wrote: i was looking for ball joints on ebay and stumbled on a over seas seller with a bunch of photo etched parts. i had forgotten about you suggesting that may be how they made the glasses. it looks like you were right! https://www.ebay.com/itm/114856782584?s ... 2749.l2649 i took the plunge and ordered a set along with the joints i wanted. at $9 i figured i'd try them. new seller to me so here is hoping everything comes as advertised. i'll report back when they get here. i can't seem to find more on ebay but i googled and found another site with them for a few dollars more. https://www.lightbringer.net/collection ... ass-frames no exp with that seller either. i'm excited to see if they are workable for 1:18. Cool I hope 1/20 is close enough

Author:	2DARK2C [ Wed Jan 05, 2022 2:59 am ]
Post subject:	Re: More 1/18 scale accessories from China
it should be pretty close. since i'm bending the arms i can always add some width there. for $9 if i can get 3 pairs to work i'll be happy.

Author:	harlie [ Wed Jan 05, 2022 9:50 am ]
Post subject:	Re: More 1/18 scale accessories from China
I dunno, if the 1/32nd ones nose bridge area is right you might even be able to do this type. Attachment: Glasses.jpg [ 117.85 KiB \| Viewed 3543 times ]

Author:	2DARK2C [ Mon Feb 07, 2022 10:09 pm ]
Post subject:	Re: More 1/18 scale accessories from China
they look pretty good in hand. both the 1:20 and 1:24 might work for 4" figures. i need to get some folded and on a figure.

Author:	johnwayne [ Tue Feb 08, 2022 2:21 am ]
Post subject:	Re: More 1/18 scale accessories from China
2DARK2C wrote: they look pretty good in hand. both the 1:20 and 1:24 might work for 4" figures. i need to get some folded and on a figure. Thank you for taking a chance on it for us. They look pretty good

Author:	2DARK2C [ Tue Feb 08, 2022 1:01 pm ]
Post subject:	Re: More 1/18 scale accessories from China
i've been reading about how to cut them free and trim the spru parts. i need to just dive in!

Page 1 of 2	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/

Author:	jcast [ Sat Jul 30, 2022 7:22 pm ]
Post subject:	Re: More 1/18 scale accessories from China
2DARK2C wrote: they look pretty good in hand. both the 1:20 and 1:24 might work for 4" figures. i need to get some folded and on a figure. So whatever happened with these? Did they work for 1/18th? I'm thinking of trying to make glasses with one eye blacked out like some people wear instead of an eye-patch.