JoeCustoms.com
https://joecustoms.com/forums/

Diorama piece - Multi-Story Building
https://joecustoms.com/forums/viewtopic.php?f=14&t=24482		 Page 1 of 1
Author:  Anlaschog [ Sun Jul 18, 2010 11:06 pm ]
Post subject:  Diorama piece - Multi-Story Building
I've been looking for some decent buildings in scale with my Gundams to use for some dioramas. I've seen some model railroad pieces but they were pretty expensive. So I decided to start making my own.

I drew up the design in CAD and can be sized to any scale needed, and is only limited to the paper size the printer supports. I added some color and glued the sheets onto card stock. It was a bit tough to get the pieces to glue together properly but, in time, I could make an entire city for my figs to battle in. :-D

Image
Image
Image
Author:  Keenan [ Sun Jul 18, 2010 11:19 pm ]
Post subject:  Re: Diorama piece - Multi-Story Building
That works. I did basically the same for my Dio story.
Author:  vidmouse [ Sun Jul 18, 2010 11:29 pm ]
Post subject:  Re: Diorama piece - Multi-Story Building
Yet another win for cardboard (cardstock, cardboard, same difference)

Nice job. Only a couple of crits:

- the edges of the buildings show a bit of the white, either from your
printout or the cardstock. Maybe some touch-up with paint (either
color -match or just in black) could help.

- Adding more 3-d effects (doors, overhangs, etc) will add a lot to
the realism of your model
Author:  Anlaschog [ Mon Jul 19, 2010 7:05 am ]
Post subject:  Re: Diorama piece - Multi-Story Building
vidmouse wrote:
- the edges of the buildings show a bit of the white, either from your
printout or the cardstock. Maybe some touch-up with paint (either
color -match or just in black) could help.]

Vidmouse, this was pretty much just a dry run to see how it would come out with the resources that I had available (also I promised a few people that I would have something by the weekend ;-) )
vidmouse wrote:
- Adding more 3-d effects (doors, overhangs, etc) will add a lot to
the realism of your model

I was planning to have additional details in the next designs :-D .
Author:  Kambei [ Mon Jul 19, 2010 9:32 am ]
Post subject:  Re: Diorama piece - Multi-Story Building
Try resizing these:

http://www.aftdownloads.co.uk/blackarchive.htm

http://www.aftdownloads.co.uk/blackarchive.htm

http://www.aftdownloads.co.uk/alienworld.htm

http://www.aftdownloads.co.uk/spacewalls.htm
Author:  Anlaschog [ Mon Jul 19, 2010 12:02 pm ]
Post subject:  Re: Diorama piece - Multi-Story Building
Kambei wrote:
Try resizing these:

Thanks for the links Kambei. I found a bunch of stuff too but most if it doesn't work well style wise but I found a couple gems including some sweet hangars.
Author:  nova [ Mon Jul 19, 2010 12:09 pm ]
Post subject:  Re: Diorama piece - Multi-Story Building
Just an idea...but you could really add to these using different texture and finish contact paper. It'd take a lot of cutting or fine line work but if you printed the building out on sticker paper, cut out all the "glass" windows and doors, and then put it over top of a reflective Contact paper it'd give just a bit more dimension to the buildings.
Author:  Cap [ Mon Jul 19, 2010 7:14 pm ]
Post subject:  Re: Diorama piece - Multi-Story Building
Cool beans on the city!

I have an idea that might help you with corners, if you don't mind the heads up. Avery, the label and sticker company makes Full Sheet Labels(Stickers) that are essentially an injet paper page that is one big label. If you build the building first in cardboard or foamboard, then print out your detailed sheets, you can just apply the paper full sheet labels to your prebuilt works so that corners are assured clean.

Just an idea my friend. Works for smaller details as well. When I needed to do custom signage or insignia like in Rob's TEF force, I did a full sheet of his TEF insignia in various sizes so that I just had to cut them out and affix to the doors, walls, etc. Since you are using a full page of graphics, this might be another way to do it.


Again, very nice city dry run!
Author:  Anlaschog [ Wed Jul 21, 2010 8:54 am ]
Post subject:  Re: Diorama piece - Multi-Story Building
Don't mind at all Cap, since it "is" called the Critiques forum :-D. I have used the Avery sheets before but these designs are printed out on 11x17 size sheets and I don't think Avery makes them in this size (guess I could double them up). I have already come up with some ideas as to eliminate some issues that came up with the prototype including the paper I use and how I construct the piece. In the mean time, I put the buildings on hold for the moment till I get the kinks worked for this other project I am working on.
Author:  Anlaschog [ Wed Jul 21, 2010 6:20 pm ]
Post subject:  Re: Diorama piece - Multi-Story Building
Kambei wrote:
Try resizing these:

http://www.aftdownloads.co.uk/blackarchive.htm

http://www.aftdownloads.co.uk/blackarchive.htm

http://www.aftdownloads.co.uk/alienworld.htm

http://www.aftdownloads.co.uk/spacewalls.htm

Thanks for the links Kambei. But his walls looks a little off. I made this at work during lunch today:Image

Edit: Check here for the rest of this project.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/