Rules    FAQ
User: Guest ( Register )
 
 
 

It is currently Fri Dec 13, 2024 5:53 am (All times are UTC - 5 hours [ DST ])


Forum rules


  • This section is for honest critique of the work shown here. Members are encouraged to give and accept non-confrontational constructive criticism as well as adoring praise and everything in between.
  • In order to show case everyone's work equally, please post multiple customs on the same day into a single thread. If you have a lot of pictures of your work you may have to add them to a separate post within that thread.
  • Please do not link to a sale thread or to eBay from your critique thread. This section isn't to be used to market your finished work. The Market Place section is better suited for that purpose.



Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 11 posts ] 
Author Message
 Post subject: Building a Better MOUSER
PostPosted: Fri Nov 08, 2013 3:20 am 
User avatar

Joined: Sun May 25, 2008 9:59 pm
Decided to add ball jointed hips and ankles to a couple of those seven pack TMNT MOUSERs. Cut 'em apart, drilled out the sockets with a pin vise, and hollowed them out with a ball end bit in a moto tool. (use a bur/cutter, abrasive bits aren't going to work on the plastic the legs are made out of.) The balls are Lego levers.

Image

Image

Image

Image

Edit- Bonus feet together pose:
Image

_________________
Greytech Heavy Industries

If it ain't broke, take it apart and lose some of the pieces. Then, it'll be a custom.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Building a Better MOUSER
PostPosted: Fri Nov 08, 2013 10:25 am 
User avatar
Plug
Plug

Joined: Tue Jun 26, 2007 10:19 am
Location: Maryland
So...do you need me to PM my address? :D

Seriously, you made a cool toy (you know based on what I've only seen in pics *sniffle*) even cooler.

_________________
:hijm70:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Building a Better MOUSER
PostPosted: Fri Nov 08, 2013 11:12 am 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
Location: Maryland
That's pretty damn ingenious.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Building a Better MOUSER
PostPosted: Fri Nov 08, 2013 11:15 am 
User avatar
Strong Fat Tongue

Joined: Tue Jun 26, 2007 10:19 am
Location: Cape Town, South Africa
Love it.

_________________
joemichaels70 wrote:
KILCARR PISSED ME OFF


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Building a Better MOUSER
PostPosted: Fri Nov 08, 2013 12:07 pm 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
Location: Under the JoeCustoms JoeCon Booth
Other than cleaning up the edges where you cut them (mostly on the feet) this looks like a solid modification. If I could find this pack in stores I'd try to do the same thing.

_________________
I'm pretty sure it's :robocopgun:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Building a Better MOUSER
PostPosted: Fri Nov 08, 2013 12:26 pm 
User avatar
DarkJedi'd

Joined: Tue Jun 26, 2007 10:19 am
Location: The Black Hole of Toydom
I'm not a TMNT fan per se, but I did pick up the only Mouser pack I've seen on the pegs.

I like what you did with it.

_________________
Hero Machine Real Characters: https://tinyurl.com/yyguul9e
Hero Machine Original Characters: https://tinyurl.com/y59j5gmd
Hero Machine Other properties: https://tinyurl.com/y48nnp8u


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Building a Better MOUSER
PostPosted: Fri Nov 08, 2013 7:14 pm 
User avatar

Joined: Sun May 25, 2008 9:59 pm
Thanks, guys! I find myself posing these two that I've modified way too much.

MS, I didn't even realize those shavings were stuck to the edges like that, until I was posting the pictures.I've cleaned up the wost of it, since. This plastic is kind of a pain, with that stuff.

Jedi, I don't collect the line, but the MOUSERS looked like too much fun when I saw them on Matt Booker's blog.

_________________
Greytech Heavy Industries

If it ain't broke, take it apart and lose some of the pieces. Then, it'll be a custom.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Building a Better MOUSER
PostPosted: Fri Nov 08, 2013 7:38 pm 
User avatar
JC Podcaster

Joined: Tue Jun 26, 2007 10:19 am
Location: Clifton, NJ
I don't collect this line either, but I have 3 packs of M.O.U.S.E.R.s (and a lone Kraang I got last year) as they are soo damn cool :)

_________________
Founding Member Of The CSOTC (Customize Something Other Than Clones) Society

Visit me on Facebook!
http://www.facebook.com/profile.php?id=100000474627568

https://www.facebook.com/Spectreverse/

Follow me on Twitter: @The_Spectre_DK


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Building a Better MOUSER
PostPosted: Fri Nov 08, 2013 7:55 pm 
User avatar
Special Limited Edition Co-Host / Membership Has Its Privileges
Special Limited Edition Co-Host / Membership Has Its Privileges

Joined: Mon Nov 19, 2007 3:31 pm
Location: Fort Wayne
Yeah that's sweet. I like the ones my son has and would get some for myself if I found more. This is brilliantly executed

_________________
Kwinn_Lives wrote:
you have now won more JCAs than anyone in the history of the award.

Mysterious Stranger wrote:
You sir are the definition of a Renaissance Nerd... you do it all so damn well.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Building a Better MOUSER
PostPosted: Fri Nov 08, 2013 11:00 pm 
User avatar
DarkJedi'd

Joined: Tue Jun 26, 2007 10:19 am
Location: The Black Hole of Toydom
Greyryder wrote:
Jedi, I don't collect the line, but the MOUSERS looked like too much fun when I saw them on Matt Booker's blog.


I don't collect TMNT myself. I've only purchased two items at retail, a MOUSERs pack and Leatherhead.

I heard someone mention the MOUSERs were out and I looked around whenever I was out and about. When I saw them, I thought they looked cool, and grabbed them.

The Leatherhead is gonna be used as either a Venomized Croc-Master v2 or a Mega Monster based on a Croc-Master v2.

_________________
Hero Machine Real Characters: https://tinyurl.com/yyguul9e
Hero Machine Original Characters: https://tinyurl.com/y59j5gmd
Hero Machine Other properties: https://tinyurl.com/y48nnp8u


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Building a Better MOUSER
PostPosted: Sat Nov 09, 2013 9:52 am 
User avatar
Foreign Vehicle Driver
Foreign Vehicle Driver

Joined: Tue Jun 26, 2007 10:19 am
I really like these too. With those mods, I can easily see these repurposed for pretty much anything.

_________________
chad_ghost (->)-(<-)

:ghost::mayor:
emoticons by Sapper


Top
 Profile Customs Feedback / Brawlingness  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 11 posts ] 

It is currently Fri Dec 13, 2024 5:53 am (All times are UTC - 5 hours [ DST ])


Who is online

Users browsing this forum: No registered users and 55 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group