JoeCustoms.com
https://joecustoms.com/forums/

HALO project i am building.
https://joecustoms.com/forums/viewtopic.php?f=14&t=41430		 Page 1 of 1
Author:  steel bonnet [ Sat Aug 02, 2014 4:46 am ]
Post subject:  HALO project i am building.
Still working on the other projects from the Dredd universe.

Have had this HALO project on the sidelines for awhile so kicked into gear to get it done.

Oh yes its 1/6th scale.

Building;-

HALO3 Marine,
2 x ODST,
SRS99D-S2 (H3) Sniper rifle
&
WARTHOG.

Attachments:
IMG_43122736327076.jpeg
IMG_43122736327076.jpeg [ 79.15 KiB | Viewed 1081 times ]
IMG_43202038395155.jpeg
IMG_43202038395155.jpeg [ 19.43 KiB | Viewed 1081 times ]
IMG_43162979732261.jpeg
IMG_43162979732261.jpeg [ 34.38 KiB | Viewed 1081 times ]
Author:  steel bonnet [ Sat Aug 02, 2014 4:48 am ]
Post subject:  Re: HALO project i am building.
Rifle with custom Marine.

Also the wip on 2 ODST Marines.
Being supervised by an Original SPARTAN ( custom figure i made).

Attachments:
IMG_43061896442796.jpeg
IMG_43061896442796.jpeg [ 37.6 KiB | Viewed 1080 times ]
IMG_50037028571148.jpeg
IMG_50037028571148.jpeg [ 49.96 KiB | Viewed 1079 times ]
Author:  steel bonnet [ Sat Aug 02, 2014 5:00 am ]
Post subject:  Re: HALO project i am building.
Some shots of my wip 1/6 scale WARTHOG.

Originally a pep build. I then re enforced the inside with Resin and Fibreglass.

One shot with a figure in seated to show size of this wee beastie.

Attachments:
IMG_49944853759729.jpeg
IMG_49944853759729.jpeg [ 37.21 KiB | Viewed 1077 times ]
IMG_49903411598628.jpeg
IMG_49903411598628.jpeg [ 20.37 KiB | Viewed 1077 times ]
IMG_50193295164890.jpeg
IMG_50193295164890.jpeg [ 41.26 KiB | Viewed 1077 times ]
Author:  Dusty79 [ Sat Aug 02, 2014 7:43 am ]
Post subject:  Re: HALO project i am building.
Are the gun and Warthog built from scratch?
Author:  steel bonnet [ Sat Aug 02, 2014 11:53 am ]
Post subject:  Re: HALO project i am building.
That they are Dusty79.

The rifle has parts from a barret 82 but scratch built.

The Warthog is a pepikura model. Scaled to 1/6 scale and printed out on numerous sheets.
Put together with Superglue and re enforcement bars.

Then i fibreglassed and resin the interior and resin coats on the exterior.
Will be going the HALO 4 axel aka standard 4 point.
Just looking at R/C wheels and still stuck on how i can do the windshield.
Author:  Dusty79 [ Sat Aug 02, 2014 12:10 pm ]
Post subject:  Re: HALO project i am building.
That's pretty amazing. I will have to google pepikura. Seems pretty neat.
Author:  Dusty79 [ Sat Aug 02, 2014 12:12 pm ]
Post subject:  Re: HALO project i am building.
So who out there can 3D design the Renegades Coyote to print up in this pepakura format?
Author:  steel bonnet [ Sun Aug 03, 2014 2:47 pm ]
Post subject:  Re: HALO project i am building.
Pep can be a lot of fun with a different way to build something. Fiddly part is that initial card build.

After that its respirator on and resin and fibreglass out. More fun.

Right then SRS99D-S2 sniper rifle finished. Just need make the scope now.
All paintes up too: Gun Metal and a silverish ala Halo3/ODST.

Attachments:
IMG_136487608493172.jpeg
IMG_136487608493172.jpeg [ 25.71 KiB | Viewed 985 times ]
IMG_136492204055758.jpeg
IMG_136492204055758.jpeg [ 27.65 KiB | Viewed 985 times ]
IMG_136476419887417.jpeg
IMG_136476419887417.jpeg [ 24.01 KiB | Viewed 985 times ]
Author:  raptor [ Sun Aug 03, 2014 3:35 pm ]
Post subject:  Re: HALO project i am building.
That is an amazing looking rifle. Very impressive.

- R
Author:  steel bonnet [ Sun Aug 03, 2014 4:31 pm ]
Post subject:  Re: HALO project i am building.
Thanks Raptor. Its taken awhile as between family and life then all the 1/18 ongoing projects lol So trying to complete the 1/6 HALO customs i have ongoing. Plus want to start the to scale Covernant ELITE figure.

With that, the Warthog needs teeth. So pep base main cannon.
However using this as template to make it again in wood/plastic.
Plus fancy doing the Rocket Pod too. As both weapons systems will be on theor own round base.
Currently toying if Troop Carrier can be done and be modular too.

Attachments:
IMG_142763349132832.jpeg
IMG_142763349132832.jpeg [ 42.53 KiB | Viewed 970 times ]
Author:  phantro [ Wed Aug 06, 2014 1:25 pm ]
Post subject:  Re: HALO project i am building.
Amazing styrene work man!

I need to learn that skill. I know the very basics.
Do you find the builds to be fragile in any way?
Are they resistant to normal wear and tear ?
Author:  Manowar [ Wed Aug 06, 2014 5:31 pm ]
Post subject:  Re: HALO project i am building.
Not too my customizers have this level of skill working in these material. The builds are great!
Author:  steel bonnet [ Fri Aug 08, 2014 7:08 pm ]
Post subject:  Re: HALO project i am building.
Thank you for the very kind words.

@phantro. This isnt styrene. It was initially card pepikur build. Then from below i have fibreglassed the inside. Externally i have applied several coats of resin.
This is also my first build so far so good lol

@manowar, thank you so much for those kind words.

Well done a little more work on the Warthog

Also this week my ThreeA Carter arrived and bloody hell he is huge.

So had to put the figures with the Warthog

Attachments:
IMG_304000875762621.jpeg
IMG_304000875762621.jpeg [ 96.8 KiB | Viewed 904 times ]
IMG_303963671568437.jpeg
IMG_303963671568437.jpeg [ 79.16 KiB | Viewed 904 times ]
IMG_303971398509440.jpeg
IMG_303971398509440.jpeg [ 95.45 KiB | Viewed 904 times ]
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/