Rules    FAQ
User: Guest ( Register )
 
 
 

It is currently Thu Dec 05, 2024 5:02 am (All times are UTC - 5 hours [ DST ])


Forum rules


  • This section is for honest critique of the work shown here. Members are encouraged to give and accept non-confrontational constructive criticism as well as adoring praise and everything in between.
  • In order to show case everyone's work equally, please post multiple customs on the same day into a single thread. If you have a lot of pictures of your work you may have to add them to a separate post within that thread.
  • Please do not link to a sale thread or to eBay from your critique thread. This section isn't to be used to market your finished work. The Market Place section is better suited for that purpose.



Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 17 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: 3D Printed Blockman
PostPosted: Sun Dec 10, 2017 7:30 pm 
User avatar
Hardest screen name to real life match-up on the board.

Joined: Thu Aug 09, 2007 9:23 pm
I designed up a Blockman style figure and printed him out. I had put the head on a ball-joint, but it didn't live up to being used as a peg, so I had to glue it in place. The pegs and holes are all 5mm and brick or TF weapon compatible. The hands can hold a 3mm peg. You can see him holding a Mega Construx gun in the pictures and in the last two pics, you see where I pegged a TF gun I had previously printed and a brick piece to him.

Image
Image
Image
Image
Image
Image
Image
Image


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 3D Printed Blockman
PostPosted: Mon Dec 11, 2017 12:47 am 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
Looks like fun.

I love the look of these kinds of projects... did you design him in a 3d art program? I tried to use Maya years ago and could not get the hang of it. Is there something with a nice easy learning curve you could recommend?

_________________
I don't care how badly I have been defeated. I declare victory nonetheless.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 3D Printed Blockman
PostPosted: Mon Dec 11, 2017 9:02 am 
User avatar
Hardest screen name to real life match-up on the board.

Joined: Thu Aug 09, 2007 9:23 pm
Yeah, I designed him in SketchUp. It's fairly easy to use and so is Tinkercad. If you're wanting to do organic looking things, I like Sculpeo.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 3D Printed Blockman
PostPosted: Mon Dec 11, 2017 3:11 pm 
User avatar
Plug
Plug

Joined: Tue Jun 26, 2007 10:19 am
Location: Maryland
Oh, very cool! Now you can make some new armor, weapons, and vehicle parts for us.

_________________
:hijm70:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 3D Printed Blockman
PostPosted: Tue Dec 12, 2017 12:26 pm 
User avatar
Hardest screen name to real life match-up on the board.

Joined: Thu Aug 09, 2007 9:23 pm
Thanks! I'm hoping to add more Blockman stuff to my line-up once I get this guy perfected. Cosmetic tweaks to make various bots will be easy enough once I have everything else working right, and I've gotten some good feedback other places on things to do to improve the print strength (some of it obvious, but I overlooked it). The nice thing about 3D models is they can be scaled easily enough, so I'm contemplating printing one of these guys out about 10" tall to be a bot for the Joes.

I never had the actual Blockman figures when I was a kid, but I had a bunch of knock-offs that were about half the size (maybe an inch tall) and came out of the capsule machines in the foyer of Wal-Mart. I loved those little guys and all their accessories - they were the humans (in power suits) for my Transformers. I wish I still had those little guys, so when I decided to try my hand at designing/printing a full figure, they were my go-to. I might try printing this guy at half scale and see how that works out, as well.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 3D Printed Blockman
PostPosted: Tue Dec 12, 2017 11:11 pm 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
Location: Manila, Philippines
MarkM wrote:
Yeah, I designed him in SketchUp. It's fairly easy to use and so is Tinkercad. If you're wanting to do organic looking things, I like Sculpeo.
Are Sketchup / Sculpeo easy to learn and use, for newbies of the trade?

Would it require autocad knowledge or something like that?

Sent from my SM-N9005 using Tapatalk


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 3D Printed Blockman
PostPosted: Wed Dec 13, 2017 4:09 am 
User avatar
Hardest screen name to real life match-up on the board.

Joined: Thu Aug 09, 2007 9:23 pm
They're pretty easy to pick up, regardless of skill level. SketchUp is basically drawing shapes and sticking them together. Sculpeo is virtual sculpting, so you have a ball of class on screen that you're pinching, pulling, squeezing, etc.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 3D Printed Blockman
PostPosted: Wed Dec 13, 2017 10:06 pm 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
Location: Manila, Philippines
MarkM wrote:
They're pretty easy to pick up, regardless of skill level. SketchUp is basically drawing shapes and sticking them together. Sculpeo is virtual sculpting, so you have a ball of class on screen that you're pinching, pulling, squeezing, etc.
Thanks. Always been meaning to try them.

Sent from my SM-N9005 using Tapatalk


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 3D Printed Blockman
PostPosted: Mon Jan 08, 2018 3:53 am 
User avatar

Joined: Fri Mar 03, 2017 11:33 am
FYI it sounds like you are talking about Sculptris... I have never heard of a modeling software called sculpeo. was it discontinued?

The project looks great! How tall is he?

_________________
Great warriors never die... they just get simulacrums made from their dna.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 3D Printed Blockman
PostPosted: Wed Jan 10, 2018 11:26 pm 
User avatar
Hardest screen name to real life match-up on the board.

Joined: Thu Aug 09, 2007 9:23 pm
Gah, yes, Sculptris, not sure where I got the name Sculpeo from at all. Thanks for the comment on the figure! He's right at 2" tall. I made him to work with Mega Construx figures as a human-sized android, or with Dia-nauts as a bigger 'bot.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 3D Printed Blockman
PostPosted: Fri Jan 12, 2018 3:52 pm 
User avatar

Joined: Fri Mar 03, 2017 11:33 am
I'm slightly more impressed, now that I know how tiny it is!

_________________
Great warriors never die... they just get simulacrums made from their dna.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 3D Printed Blockman
PostPosted: Tue Jan 30, 2018 6:37 pm 
User avatar
HATES Mattel

Joined: Tue Jun 26, 2007 10:19 am
MarkM wrote:
Gah, yes, Sculptris, not sure where I got the name Sculpeo from at all. Thanks for the comment on the figure! He's right at 2" tall. I made him to work with Mega Construx figures as a human-sized android, or with Dia-nauts as a bigger 'bot.


Can we get comparison pics?

Mainframe wrote:
MarkM wrote:
They're pretty easy to pick up, regardless of skill level. SketchUp is basically drawing shapes and sticking them together. Sculpeo is virtual sculpting, so you have a ball of class on screen that you're pinching, pulling, squeezing, etc.
Thanks. Always been meaning to try them.


I'd give TinkerCAD.com a try first just because it's browser-based and you don't have to download anything. It's exactly what the beginner needs, imho.

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 3D Printed Blockman
PostPosted: Wed Jan 31, 2018 12:48 am 
User avatar
Hardest screen name to real life match-up on the board.

Joined: Thu Aug 09, 2007 9:23 pm
I'll try to post some up tomorrow


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 3D Printed Blockman
PostPosted: Wed Jan 31, 2018 12:09 pm 
User avatar
Hardest screen name to real life match-up on the board.

Joined: Thu Aug 09, 2007 9:23 pm
Here you go:
Image

Image

Image


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 3D Printed Blockman
PostPosted: Wed Jan 31, 2018 12:09 pm 
User avatar
Hardest screen name to real life match-up on the board.

Joined: Thu Aug 09, 2007 9:23 pm
Here you go:
Image

Image

Image


Top
 Profile Customs Feedback / Brawlingness  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 17 posts ]  Go to page 1, 2  Next

It is currently Thu Dec 05, 2024 5:02 am (All times are UTC - 5 hours [ DST ])


Who is online

Users browsing this forum: Bing [Bot] and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group