JoeCustoms.com https://joecustoms.com/forums/ |
|
AVE 2023 Customs and Updates: #22-26 3d printed thrones https://joecustoms.com/forums/viewtopic.php?f=14&t=48866 |
Page 1 of 4 |
Author: | alleyviperelite [ Sun Jan 22, 2023 5:19 pm ] |
Post subject: | AVE 2023 Customs and Updates: #22-26 3d printed thrones |
Been busy building a new collection room and moving everything over, plus setting up my new 3d printer and working out the bugs of my old one. I plan to have some pics of the new setup soon. While moving the Boss Fight Gordon's, I got frustrated trying to pose them in a static position for display. Modified a doll stand design and successfully printed the first one today. I had a little wiggling as the stem got taller, it was printed upside down so I wouldn't need supports. You can see near the base some misshapen layers. Not enough to worry for my purposes but I'll look into adding supports if I print more. Sent from my SM-S908U using Tapatalk |
Author: | past nastification [ Sun Jan 22, 2023 6:37 pm ] |
Post subject: | Re: AVE 2023 Customs and Updates: #1 Printed Gorgon Stands |
Very nice. Is it one solid piece? |
Author: | alleyviperelite [ Sun Jan 22, 2023 8:10 pm ] |
Post subject: | Re: AVE 2023 Customs and Updates: #1 Printed Gorgon Stands |
past nastification wrote: Very nice. Is it one solid piece? I did it as a 2 piece so I wouldn't need supports but I think I may try a one piece design in the future. The bottom base is separate from the post with a hole to connect the two. Sent from my SM-S908U using Tapatalk |
Author: | 2DARK2C [ Mon Jan 23, 2023 1:19 am ] |
Post subject: | Re: AVE 2023 Customs and Updates: #1 Printed Gorgon Stands |
I like it. Very smart fix. |
Author: | pluv [ Mon Jan 23, 2023 10:52 pm ] |
Post subject: | Re: AVE 2023 Customs and Updates: #1 Printed Gorgon Stands |
Can the hook be on a ball joint? I'm asking because the new Boss Fight Court of the Dead mermaids would work...swimmingly if it could have a little tilt to it. |
Author: | alleyviperelite [ Tue Jan 24, 2023 6:57 pm ] |
Post subject: | Re: AVE 2023 Customs and Updates: #1 Printed Gorgon Stands |
pluv wrote: Can the hook be on a ball joint? I'm asking because the new Boss Fight Court of the Dead mermaids would work...swimmingly if it could have a little tilt to it. I believe that is possible and a brilliant idea. |
Author: | alleyviperelite [ Fri Feb 03, 2023 9:43 pm ] |
Post subject: | Re: AVE 2023 Customs and Updates: #1 Printed Gorgon Stands |
Streethawk began as a vigilante out for justice where the courts failed. His day to day life as a police officer soon suffered as he fell deeper into the shadows of his nightlife. He turned a blind eye as Kharma escaped prison and offered his assistance to her Phoenix Guard. He could no longer fight the world's injustices alone. He now belonged to a team who would fight the wrongs worldwide. Attachment: I never had any idea who Streethawk was but I snagged the Funskool figure from small smalljoes back in the day. I really dug the look of the reused TARGAT mold and Spearhead legs on black and silver. Since I used this fortnite figure for my TARGAT. I thought it was only fitting to repaint another as Streethawk. Sent from my SM-S908U using Tapatalk |
Author: | 2DARK2C [ Sat Feb 04, 2023 4:25 pm ] |
Post subject: | Re: AVE 2023 Customs and Updates: #2 Streethawk |
He looks great all black. Is that Catwoman's bike? |
Author: | alleyviperelite [ Sat Feb 04, 2023 4:36 pm ] |
Post subject: | Re: AVE 2023 Customs and Updates: #2 Streethawk |
2DARK2C wrote: He looks great all black. Is that Catwoman's bike? Yes it is Catwomans bike from the two packSent from my SM-S908U using Tapatalk |
Author: | DanOfTheDead [ Sat Feb 04, 2023 5:56 pm ] |
Post subject: | Re: AVE 2023 Customs and Updates: #2 Streethawk |
very, very cool use of non-joe bits to make a joe adjacent figure! |
Author: | past nastification [ Sat Feb 04, 2023 6:49 pm ] |
Post subject: | Re: AVE 2023 Customs and Updates: #2 Streethawk |
Looks great. Did you do any painting to the bike? |
Author: | alleyviperelite [ Sat Feb 04, 2023 11:21 pm ] |
Post subject: | Re: AVE 2023 Customs and Updates: #2 Streethawk |
past nastification wrote: Looks great. Did you do any painting to the bike? Yep, the bike was black with gray paint on the motor parts and wheels. I didn't intend to do any painting, but it was kind of sloppy and gloss too. I didn't do a great job but it's good enough for me.Sent from my SM-S908U using Tapatalk |
Author: | alleyviperelite [ Mon Feb 06, 2023 9:41 pm ] |
Post subject: | Re: AVE 2023 Customs and Updates: #2 Streethawk |
I doubt this will remain but tonight I hit the local Walmart up and they actually had clearance items. Star Wars Reva body with Spin Master Batgirl head makes a pretty goo, well articulated, lbc Batgirl. Attachment: Sent from my SM-S908U using Tapatalk |
Author: | 2DARK2C [ Mon Feb 06, 2023 10:11 pm ] |
Post subject: | Re: AVE 2023 Customs and Updates: #3 LBC Batgirl |
i like that a lot! she looks great. |
Author: | 8bitboy [ Tue Feb 07, 2023 9:33 am ] |
Post subject: | Re: AVE 2023 Customs and Updates: #3 LBC Batgirl |
I like her. Seems a bit commanding. Colours are also a welcome change to the familiar. |
Page 1 of 4 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |