JoeCustoms.com
https://joecustoms.com/forums/

Welding mask
https://joecustoms.com/forums/viewtopic.php?f=15&t=24188		 Page 1 of 1
Author:  Otto the Otter [ Thu Jul 01, 2010 6:05 pm ]
Post subject:  Welding mask
Is there an appropriate sized welding mask floating around out there in 1/18 land?
Or does anyone have any ideas of what to use to make one?
Author:  Cap [ Thu Jul 01, 2010 6:17 pm ]
Post subject:  Re: Welding mask
I might have one or two, let me check my stuff. Even have the torch and tank too.
Author:  bcost74 [ Thu Jul 01, 2010 6:18 pm ]
Post subject:  Re: Welding mask
The helmet from Matt Trakker could work as a Welding mask. Cut the helmet in half and attach the front to another helmet. Repaint the helmet either dark grey or black.
Author:  Otto the Otter [ Thu Jul 01, 2010 7:05 pm ]
Post subject:  Re: Welding mask
I thought about going that route; cutting the front of a Neo-Viper's or Night Adder' helmet off and using an annoying twist-tie thing as the strap that'll hold it to the figure's head. Matt Trakker is a bit more difficult to come by just for this application.
Author:  bcost74 [ Thu Jul 01, 2010 7:12 pm ]
Post subject:  Re: Welding mask
Suburbanator wrote:
I thought about going that route; cutting the front of a Neo-Viper's or Night Adder' helmet off and using an annoying twist-tie thing as the strap that'll hold it to the figure's head. Matt Trakker is a bit more difficult to come by just for this application.


I have a Matt Trakker helmet that I could send you. I have no use for it and if it works for your custom, than I will let you have it.
Author:  The Spectre [ Thu Jul 01, 2010 7:37 pm ]
Post subject:  Re: Welding mask
I actually have sevceral different 1/18 scale welding helmets/masks from various toylines (Chap Mei, Corps!, etc.) over the years. I could part with one of the Corps! ones if bribed correctly (like with a ROC Flash helmet, 2nd 5ph CC staff or PP Baroness pulse rifle ;) ).
Author:  Jimmyboy [ Thu Jul 01, 2010 9:25 pm ]
Post subject:  Re: Welding mask
In some of the new SW figs coming out, there will be a Hoth Han Solo and he has a welding mask
Author:  Keenan [ Thu Jul 01, 2010 9:37 pm ]
Post subject:  Re: Welding mask
CORPS! Had one- it was yellow. (If I find mine I'll take a pic.)
Author:  bigbawsmcgraw [ Fri Jul 02, 2010 6:04 am ]
Post subject:  Re: Welding mask
Jimmyboy wrote:
In some of the new SW figs coming out, there will be a Hoth Han Solo and he has a welding mask

you bet me to it, the han mask is really good. you should take a look they should be out in retail everywhere
Author:  Otto the Otter [ Fri Jul 02, 2010 10:03 pm ]
Post subject:  Re: Welding mask
bcost74 wrote:
Suburbanator wrote:
I thought about going that route; cutting the front of a Neo-Viper's or Night Adder' helmet off and using an annoying twist-tie thing as the strap that'll hold it to the figure's head. Matt Trakker is a bit more difficult to come by just for this application.


I have a Matt Trakker helmet that I could send you. I have no use for it and if it works for your custom, than I will let you have it.

I might take this into consideration. I just got Spec. Trakker today and although it doesn't look like a conventional welder's mask, it could work. Especially how big it is, it'll fit over my figure's head nicely.

Spectre wrote:
I actually have sevceral different 1/18 scale welding helmets/masks from various toylines (Chap Mei, Corps!, etc.) over the years. I could part with one of the Corps! ones if bribed correctly (like with a ROC Flash helmet, 2nd 5ph CC staff or PP Baroness pulse rifle ;) ).


Sounds awesome, unfortunately I haven't got any of those items. And what is a "2nd 5ph CC staff"?
Author:  The Spectre [ Fri Jul 02, 2010 11:07 pm ]
Post subject:  Re: Welding mask
Suburbanator wrote:
bcost74 wrote:
Suburbanator wrote:
I thought about going that route; cutting the front of a Neo-Viper's or Night Adder' helmet off and using an annoying twist-tie thing as the strap that'll hold it to the figure's head. Matt Trakker is a bit more difficult to come by just for this application.


I have a Matt Trakker helmet that I could send you. I have no use for it and if it works for your custom, than I will let you have it.

I might take this into consideration. I just got Spec. Trakker today and although it doesn't look like a conventional welder's mask, it could work. Especially how big it is, it'll fit over my figure's head nicely.

Spectre wrote:
I actually have sevceral different 1/18 scale welding helmets/masks from various toylines (Chap Mei, Corps!, etc.) over the years. I could part with one of the Corps! ones if bribed correctly (like with a ROC Flash helmet, 2nd 5ph CC staff or PP Baroness pulse rifle ;) ).


Sounds awesome, unfortunately I haven't got any of those items. And what is a "2nd 5ph CC staff"?


That should actually read pk, not ph, damn typos :verymad:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/