Rules    FAQ
User: Guest ( Register )
 
 
 

It is currently Sun Nov 17, 2024 10:23 am (All times are UTC - 5 hours [ DST ])




Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 42 posts ]  Go to page 1, 2, 3  Next
Author Message
 Post subject: ARAH Prison Jumpsuit parts list.
PostPosted: Tue Feb 21, 2012 2:49 pm 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
Based very much on Lance Sputnik's Mindbender POW

Image

I've been thinking it'd be fun to cast up a set of "universal" parts that could be used to LBC any figure into prison togs.


My initial list is:

Torso: '85 Shipwreck
Crotch: Ripper
Left Thigh: Cutter
Right Thigh: '85 Shipwreck
Feet: Tunnel Rat

For Short sleeves, I think Chuckles' upper arms would work.

I'm drawing a bit of a blank on options for Long sleeves... something that would look like this:

Image

I've not tried fitting any parts so alternate parts may be needed to swap in or out.
any thoughts or suggestions?

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: ARAH Prison Jumpsuit parts list.
PostPosted: Tue Feb 21, 2012 2:57 pm 
User avatar
Moderator
Moderator

Joined: Tue Jun 26, 2007 10:19 am
Location: Pants
People always go straight to Tunnel Rat... I think Doc's lower legs are a better look. Less flared, and less dressy looking shoes.

_________________
Joe Customs wrote:
"Lance Sputnik you are both insane and brilliant!" (meandnooneelse)
"I want a Lance Sputnik range of figures." (Kambei)
"i love you, Lance Sputnik." (Joemichales70)

:lacespudneck: :mindbender:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: ARAH Prison Jumpsuit parts list.
PostPosted: Tue Feb 21, 2012 3:02 pm 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
How to Doc's feet meet up with other thighs, though? his legs always strike me as being extra skinny


Quick Kick's legs could be an option...but I think they'd require something additional...like ankle cuffs.

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: ARAH Prison Jumpsuit parts list.
PostPosted: Tue Feb 21, 2012 3:03 pm 
User avatar
Moderator
Moderator

Joined: Tue Jun 26, 2007 10:19 am
Location: Pants
For long sleeves, you can go with cuff flipped up, Doc/Duke. All the other long sleeves I can think of either have bicep pockets, or elastic wrists, like 86 Hawk

Or... Headman!

That's your guy.

_________________
Joe Customs wrote:
"Lance Sputnik you are both insane and brilliant!" (meandnooneelse)
"I want a Lance Sputnik range of figures." (Kambei)
"i love you, Lance Sputnik." (Joemichales70)

:lacespudneck: :mindbender:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: ARAH Prison Jumpsuit parts list.
PostPosted: Tue Feb 21, 2012 3:05 pm 
User avatar
Moderator
Moderator

Joined: Tue Jun 26, 2007 10:19 am
Location: Pants
I use Doc legs all the time. Unless you're popping super bulky like Big Boa thighs, they mesh right up with the thighs you're talking about. I think I did the exact combo on my Star Brigade GP Mulder

_________________
Joe Customs wrote:
"Lance Sputnik you are both insane and brilliant!" (meandnooneelse)
"I want a Lance Sputnik range of figures." (Kambei)
"i love you, Lance Sputnik." (Joemichales70)

:lacespudneck: :mindbender:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: ARAH Prison Jumpsuit parts list.
PostPosted: Tue Feb 21, 2012 3:22 pm 
User avatar
Plug
Plug

Joined: Tue Jun 26, 2007 10:19 am
Location: Maryland
Some other options for parts.

Arms: Long Arm add flesh wrists, JvC Headman, Action Sailor
Thighs: Headman, Nitro Viper, Action Sailor
Crotch: Alley Viper v.1 with blue removed, Windmill
Feet: Cross Country v.2, Flak Viper

_________________
:hijm70:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: ARAH Prison Jumpsuit parts list.
PostPosted: Tue Feb 21, 2012 5:02 pm 
User avatar
Ripe with kibble / Bojack Strobman
Ripe with kibble / Bojack Strobman

Joined: Tue Jun 26, 2007 10:19 am
Location: !!BEYONDER!!
awww. you guys love each other.

:love:

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: ARAH Prison Jumpsuit parts list.
PostPosted: Tue Feb 21, 2012 9:33 pm 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
joemichaels70 wrote:
awww. you guys love each other.

:love:


It's clearly an abusive relationship...We stay together for the kids (ARAH style custom)

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: ARAH Prison Jumpsuit parts list.
PostPosted: Tue Feb 28, 2012 1:54 am 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
Image


Just trying out some parts combos.

I don't think I like Docs feet...they feel too small.

but I do like the CC v1/Shipwreck thigh combo..as I think they're a better match than Cutter/ Shipwreck.

Anybody any good at using Photoshop to Replace colors care to give these parts uniform colors?

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: ARAH Prison Jumpsuit parts list.
PostPosted: Tue Feb 28, 2012 1:19 pm 
User avatar
ARAHddict
ARAHddict

Joined: Tue Jun 26, 2007 10:19 am
Location: The Netherlands
I used the WIP legs on the right in my Cochese: http://www.joecustoms.com/customs/custo ... C&id=10863 (scroll down for the WIP pic), so you can see it painted if that's any help.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: ARAH Prison Jumpsuit parts list.
PostPosted: Tue Feb 28, 2012 1:34 pm 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
Tim 121RVC wrote:
I used the WIP legs on the right in my Cochese: http://www.joecustoms.com/customs/custo ... C&id=10863 (scroll down for the WIP pic), so you can see it painted if that's any help.


I'd looked up your recipe for that figure when I was putting together my list...Seeing it on toycutter reminded me of it.

It's funny, but Tunnel Rat's lower legs are a little bit longer than the other lowers I have pictured.

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: ARAH Prison Jumpsuit parts list.
PostPosted: Wed Feb 29, 2012 11:08 am 
User avatar
Plug
Plug

Joined: Tue Jun 26, 2007 10:19 am
Location: Maryland
Saw ZombieGuide's Break-Out the other day and thought of this thread. That is another option especially if you use the comic pack Grunt legs that came in maroon. http://www.joecustoms.com/customs/custo ... 10&id=2630

_________________
:hijm70:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: ARAH Prison Jumpsuit parts list.
PostPosted: Tue Nov 27, 2012 2:01 am 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
I appreciate all the input... I'm pretty sure I've settled on a final Recipe...

Image

Shipwreck Torso
Shipwreck Upper Arms
Ripper Crotch
Quick Kick Thighs
Quick Kick Lower Legs w/ Boots from Hit N Run...


Just need to fill a couple gaps where the boots meet the pants, then I'll be ready for disassembly and adding yet another project to the casting queue...

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: ARAH Prison Jumpsuit parts list.
PostPosted: Tue Nov 27, 2012 2:50 am 
User avatar
DarkJedi'd

Joined: Tue Jun 26, 2007 10:19 am
Location: The Black Hole of Toydom
This might be too obvious, but do you want prisoners wearing belts?

That just screams contraband weapon to me...

_________________
Hero Machine Real Characters: https://tinyurl.com/yyguul9e
Hero Machine Original Characters: https://tinyurl.com/y59j5gmd
Hero Machine Other properties: https://tinyurl.com/y48nnp8u


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: ARAH Prison Jumpsuit parts list.
PostPosted: Tue Nov 27, 2012 5:00 am 
User avatar

Joined: Sun Feb 10, 2008 4:31 pm
Location: WI
DarkJedi wrote:
This might be too obvious, but do you want prisoners wearing belts?

That just screams contraband weapon to me...


I agree with this. I know you were set, but here's a few more considerations to avoid having a belt. Use a Tracker waist but sand off the string to use as a one piece jumpsuit. Of if you want a two piece uniform use Duke v4's waist.

_________________
:falcon: ARAH 'til death


Top
 Profile Customs Feedback / Brawlingness  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 42 posts ]  Go to page 1, 2, 3  Next

It is currently Sun Nov 17, 2024 10:23 am (All times are UTC - 5 hours [ DST ])


Who is online

Users browsing this forum: Google [Bot] and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group