Fanboyimus Prime wrote:
I have more or less completed a RAH custom of the Sigma Six Lt. Stone
| JoeCustoms.com https://joecustoms.com/forums/ |
|
| How can one make an eyepatch? https://joecustoms.com/forums/viewtopic.php?f=15&t=42188 |
Page 1 of 1 |
| Author: | Fanboyimus Prime [ Sat Dec 13, 2014 8:20 am ] |
| Post subject: | How can one make an eyepatch? |
I have more or less completed a RAH custom of the Sigma Six Lt. Stone, but need to figure out how to make an eyepatch. So what ways can make one? |
|
| Author: | Mysterious Stranger [ Sat Dec 13, 2014 12:50 pm ] |
| Post subject: | Re: How can one make an eyepatch? |
Best way at this scale is to sculpt it. A little dab of Apoxie Fixit Sculpt or green stuff shaped on the eye and then a tiny strand around the head for the strap, let it cure, paint and you're all set. If you need specific help on how to do this just ask or you can check the JoeWiki for tutorials. |
|
| Author: | drbindy [ Sat Dec 13, 2014 2:26 pm ] |
| Post subject: | Re: How can one make an eyepatch? |
MS is half right. Sculpt the patch, yes (though a cut down piece of electrical tape glued in place can work too), but DON'T sculpt the strap. Looks way out of proportion. Use black thread, with a fine amount of glue to set it into place (and use the glue mostly on the hair portion and at the patch; use as little as possible on the skin of the figure |
|
| Author: | Tim 121RVC [ Sat Dec 13, 2014 4:01 pm ] |
| Post subject: | Re: How can one make an eyepatch? |
Fanboyimus Prime wrote: I have more or less completed a RAH custom of the Sigma Six Lt. Stone
|
|
| Author: | AdrienVeidt [ Sat Dec 13, 2014 4:45 pm ] |
| Post subject: | Re: How can one make an eyepatch? |
If you want to a removable patch, use one of them small black latex bands for ponytails, and fold a piece of paper over it and trim to eye patch shape and paint black. Careful use of a fresh x-acto can get the latex band cut in half so it's not so wide. |
|
| Author: | Cap [ Mon Dec 15, 2014 5:19 am ] |
| Post subject: | Re: How can one make an eyepatch? |
MU X-23's belt works also for a removable eyepatch. |
|
| Author: | daremo [ Tue Dec 16, 2014 9:24 pm ] |
| Post subject: | Re: How can one make an eyepatch? |
Sculpting is the direction I'd go. I used green stuff on this guy's eyepatch. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|