i want to make a cigarette hanging out of the mouth of my current project. can you guys give me some tips and possibly lead me to some pics of 3.75" smokers
i smoked for 20 yrs and quit cold turkey, hardest thing i ever did.
| JoeCustoms.com https://joecustoms.com/forums/ |
|
| smoke 'em if you got 'em..... need pics of our scale smokes! https://joecustoms.com/forums/viewtopic.php?f=15&t=42343 |
Page 1 of 1 |
| Author: | 2DARK2C [ Fri Jan 16, 2015 10:18 pm ] |
| Post subject: | smoke 'em if you got 'em..... need pics of our scale smokes! |
i want to make a cigarette hanging out of the mouth of my current project. can you guys give me some tips and possibly lead me to some pics of 3.75" smokers i smoked for 20 yrs and quit cold turkey, hardest thing i ever did. |
|
| Author: | Dusty79 [ Fri Jan 16, 2015 10:27 pm ] |
| Post subject: | Re: smoke 'em if you got 'em..... need pics of our scale smo |
I have heard people use toothpicks for cigars, so you may need a tiny finishing nail or a brad to get the right diameter. Sent from my iPhone using Tapatalk |
|
| Author: | joemichaels70 [ Fri Jan 16, 2015 11:50 pm ] |
| Post subject: | Re: smoke 'em if you got 'em..... need pics of our scale smo |
For my Loser's Clay custom, I used a cut-off push pin (think sewing pin) - drilled a small hole in the lip, dot of glue, and some paint - |
|
| Author: | 2DARK2C [ Sat Jan 17, 2015 12:11 am ] |
| Post subject: | Re: smoke 'em if you got 'em..... need pics of our scale smo |
thanks guys! |
|
| Author: | Cap [ Sat Jan 17, 2015 4:07 am ] |
| Post subject: | Re: smoke 'em if you got 'em..... need pics of our scale smo |
I usually keep all styrene sprues from any model ships or accessories (miniatures and such) which make good cigarettes as they are sometimes cylindrical. I used one on my John Constantine custom (based on the comic of my time. Attachment: Constantine3.jpg [ 190.08 KiB | Viewed 850 times ] |
|
| Author: | newwavepop [ Sat Jan 17, 2015 4:33 am ] |
| Post subject: | Re: smoke 'em if you got 'em..... need pics of our scale smo |
joemichaels70 wrote: For my Loser's Clay custom, I used a cut-off push pin (think sewing pin) - drilled a small hole in the lip, dot of glue, and some paint - that's pretty much what I was thinking. it seems like about the only thing small enough to look right and strong enough to not break. |
|
| Author: | Mysterious Stranger [ Sat Jan 17, 2015 9:18 pm ] |
| Post subject: | Re: smoke 'em if you got 'em..... need pics of our scale smo |
For actual smoke just take a little bit of cotton from a cotton ball and stretch it out to look like whisps of smoke. |
|
| Author: | 2DARK2C [ Sat Jan 17, 2015 9:31 pm ] |
| Post subject: | Re: smoke 'em if you got 'em..... need pics of our scale smo |
i'll try that mysterious stranger! i just finished painting my cig. i didn't have a small enough drill so i simplt put the pointy end of a" push pin?" where i wanted the cig and applied a lot of pressure with my coffee table. i got it in there enough to know it won't just fall out , over 1/4" probably. i was actually worried it would poke out the other side and hamper neck installation. i don't want to take pics until everything is 100% dry, but i will update tomorrow . thanks again for all the responses! |
|
| Author: | 2DARK2C [ Sun Jan 18, 2015 1:44 am ] |
| Post subject: | Re: smoke 'em if you got 'em..... need pics of our scale smo |
 
|
|
| Author: | joemichaels70 [ Sun Jan 18, 2015 1:48 pm ] |
| Post subject: | Re: smoke 'em if you got 'em..... need pics of our scale smo |
Awesome! |
|
| Author: | Dusty79 [ Sun Jan 18, 2015 1:53 pm ] |
| Post subject: | Re: smoke 'em if you got 'em..... need pics of our scale smo |
That is pretty sweet Sent from my iPhone using Tapatalk |
|
| Author: | Cap [ Sun Jan 18, 2015 2:39 pm ] |
| Post subject: | Re: smoke 'em if you got 'em..... need pics of our scale smo |
Most awesome! |
|
| Author: | 2DARK2C [ Sun Jan 18, 2015 3:41 pm ] |
| Post subject: | Re: smoke 'em if you got 'em..... need pics of our scale smo |
thanks for the help and kind words guys! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|