Rules    FAQ
User: Guest ( Register )
 
 
 

It is currently Sat Jan 11, 2025 4:09 pm (All times are UTC - 5 hours [ DST ])




Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 9 posts ] 
Author Message
 Post subject: How to create an ab crunch?
PostPosted: Tue Apr 04, 2017 3:46 pm 

Joined: Mon Mar 06, 2017 12:23 am
I've noticed that 80% of the newer Marvel Infinite 3.75 figures have no waist bend or turn. I haven't come across any guides about creating a joint or any movement in this area, so can someone maybe send me in the right direction?

I was super disappointed when I picked up the Rogue for this reason.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: How to create an ab crunch?
PostPosted: Wed Apr 05, 2017 6:08 pm 
User avatar
Formerly Push You Down

Joined: Tue Jun 26, 2007 10:19 am
Location: Rosemead CA
Crunch or swivel?

Swivel seems doable... adding an actual hinge seems hard.

_________________
Visit my website for updates - bymichaeltanner.com


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: How to create an ab crunch?
PostPosted: Wed Apr 05, 2017 6:53 pm 

Joined: Sat Nov 10, 2007 9:59 pm
Location: Chicago, IL
I've only seen video tutorials on switching torsos from one line to the next. To actually add the ab crunch articulation will require a decent amount of work but it can be done. You will have to cut the torso where you want it it to be articulated. Then you either need to fabricate the joint (ball joint might be the simplest to add here) or take the guts from a donor figure. Once you have the joint worked out, you'll need to go back and fix the sculpt so it looks nice. That's the basics of adding the joint. If I come across any tutorials, I'll link them here.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: How to create an ab crunch?
PostPosted: Wed Apr 05, 2017 8:00 pm 
User avatar

Joined: Mon Oct 07, 2013 3:59 pm
Location: MS
I think most people find a base figure with the articulation they want and similar color if possible, then bash the important bits onto it.

_________________
The more you run over a dead cat,
the flatter it gets.
-Anonymous


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: How to create an ab crunch?
PostPosted: Thu Apr 06, 2017 1:52 pm 
User avatar
Plug
Plug

Joined: Tue Jun 26, 2007 10:19 am
Location: Maryland
daremo wrote:
I've only seen video tutorials on switching torsos from one line to the next. To actually add the ab crunch articulation will require a decent amount of work but it can be done. You will have to cut the torso where you want it it to be articulated. Then you either need to fabricate the joint (ball joint might be the simplest to add here) or take the guts from a donor figure. Once you have the joint worked out, you'll need to go back and fix the sculpt so it looks nice. That's the basics of adding the joint. If I come across any tutorials, I'll link them here.
I don't think I've seen anyone do it who didn't have to cover up the cut line. You'd probably need two of the exact same figure to pull it off without an obvious seam.

More often than not, like MJ Tanner mentioned, I've seen people add a waist swivel or Marauder style ball joint at the waist where the belt line creates a natural transition.

_________________
:hijm70:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: How to create an ab crunch?
PostPosted: Thu Apr 06, 2017 11:38 pm 

Joined: Sat Nov 10, 2007 9:59 pm
Location: Chicago, IL
That's why I'd go back and pretty it up with sculpt work ;) . I'm not afraid of a little sculpt work, it's the painting that is a terror.

Or you could cast the details onto another torso that has the articulation. But that's a whole different demon.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: How to create an ab crunch?
PostPosted: Fri Apr 07, 2017 6:25 pm 
User avatar

Joined: Sat Oct 13, 2007 1:08 am
Location: Las Vegas
You're likely going to have to repaint the joint anyway. You would probably be better of putting the head and part you like on to a Hacks blank and painting it.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: How to create an ab crunch?
PostPosted: Mon Apr 10, 2017 10:26 pm 
User avatar
HATES Mattel

Joined: Tue Jun 26, 2007 10:19 am
Better yet, since those abs-less MUs also lack wrists, just buy a HACK blank for the same price and use everything in the bag to create the MU character from scratch. You're basically asking how to spend a whole lot of money, time, and effort in half-assing what can be simply bought from the people that were making the MUs with the features you miss.

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: How to create an ab crunch?
PostPosted: Mon Apr 10, 2017 10:57 pm 

Joined: Mon Mar 06, 2017 12:23 am
I'm asking as modding tip, not because I want a Rogue who can turn. It may seems like a waste of time, but that's my burden.


Top
 Profile Customs Feedback / Brawlingness  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 9 posts ] 

It is currently Sat Jan 11, 2025 4:09 pm (All times are UTC - 5 hours [ DST ])


Who is online

Users browsing this forum: No registered users and 35 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group