I always wanted a 1:18th. scale version of the Undertaker, then i heard about the BnB figures coming out and got one, but still wasn't happy, so the other day i sat down and enhanced mine, my first attempt didn't go over so well, i used Zartan v9 legs, but he was out of scale, so i decided to boost his height a little and settled on 25th. Anny. destro legs, that was the one and so without further ado...

The PHENOM... The UNDERTAKER






Parts

Head, Upper torso, Arms- BnB Undertaker
Hands- Night Creeper v9
Waist- 25th. Buzzer
Legs- 25th. Destro
Mods- Green Stuff

_________________

The added height makes so much sense. Wish Jakks felt the same way.

_________________

I'm diggen the added height. Really helps him fit in the scale better.

Thanks gents, i think next up is Kane.

Then i will have the "Brothers of Destruction" in scale.

_________________

Cool beans, mate. First time I've seen a correctly scaled BnB Taker.

_________________

You made a seemless custom that basically "cured" a large problem with that line. Even if they aren't meant to be in Joe scale, having basically everyone be the same height was a failure of BnB. Great fix.

btw, how does he size up against 25A Joes?

_________________

I have been wanting to do the same thing, how did you remove the BnB leggs?

_________________

Simple, most of them just pop right off, but then again there are stubborn ones, either heat up some water in the microwave and put the figure in it for a couple minutes or use a hair dryer.

I didn't reuse the BnB legs, i used 25th. Destro legs. For the waist i cut a 25th. Buzzer at the belt line and used some Green Stuff and smushed the 2 halves together, then i wetted my fingers with water and smoothed the excess around the waist, let it set and cure, came back and primed, then painted. The tricky part of this was filling and smoothing Destro's leg holster, my first attempt at sculpting, not to good, but the paint covered it up, LOL,

Hope this helps ya out some.

_________________