Rules    FAQ
User: Guest ( Register )
 
 
 

It is currently Tue Nov 26, 2024 8:45 pm (All times are UTC - 5 hours [ DST ])




Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 105 posts ]  Go to page 1, 2, 3, 4, 5 ... 7  Next
Author Message
 Post subject: JoeRoom Development 01/18/18 - Page 7 - From the Closet
PostPosted: Tue Jun 02, 2009 7:51 pm 
User avatar
Ripe with kibble / Bojack Strobman
Ripe with kibble / Bojack Strobman

Joined: Tue Jun 26, 2007 10:19 am
Location: !!BEYONDER!!
Edit: Rather than set up a different thread for my different collection display intentions,
I figured I'd just reconfigure this thread to be a general use/discussion/showcase for the process & progress.


original post re: USS FLAGG Anybody know how much this thing weighs?

additional question:

Anybody know how much this would weigh with a couple Skystrikers, a Tomahawk & a few Skyhawks on it?

thanks in advance -


Update 7/26/09 = Found some original room photos...
Attachment:
JR_Raw1.jpg
JR_Raw1.jpg [ 244.91 KiB | Viewed 2670 times ]

Attachment:
JR_Raw2.jpg
JR_Raw2.jpg [ 291.84 KiB | Viewed 2670 times ]

Attachment:
JR_Raw3.jpg
JR_Raw3.jpg [ 265.4 KiB | Viewed 2670 times ]

Attachment:
JR_Raw4.jpg
JR_Raw4.jpg [ 281.06 KiB | Viewed 2670 times ]

Attachment:
JR_Raw5.jpg
JR_Raw5.jpg [ 274.44 KiB | Viewed 2670 times ]

Attachment:
JR_Raw6.jpg
JR_Raw6.jpg [ 209.79 KiB | Viewed 2670 times ]

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Odd question about the FLAGG
PostPosted: Tue Jun 02, 2009 10:42 pm 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
Largest Deck Plate (the Heaviest Peice in the Flagg) weighs about 10lbs
The next largest Deck plate is about 4lbs
A Sky Striker shell is about 2lbs

Call the pair of Strikers 5lbs
I'd guestimate the whole of the Flagg being about 40lbs

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Odd question about the FLAGG
PostPosted: Tue Jun 02, 2009 11:43 pm 
User avatar
Ripe with kibble / Bojack Strobman
Ripe with kibble / Bojack Strobman

Joined: Tue Jun 26, 2007 10:19 am
Location: !!BEYONDER!!
thanks nova -

you think that if a guy were to load that sucker up with crew figures, deck vehicles, maybe a whale or ttbp plus a 3ft by 8ft piece of 3/4" plywood, he'd be looking at 100# or so?

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Odd question about the FLAGG
PostPosted: Wed Jun 03, 2009 12:00 am 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
Just curious, do you want to know for support structure or shipping? If you are .......say floating it on a pool and trying to figure out ballast, then estimate extra.... to account for occasional leaning when playing with it. You might also want to go a little wide on the base to keep her from rolling........just off the top of my head :shifty: .

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Odd question about the FLAGG
PostPosted: Wed Jun 03, 2009 12:21 am 
User avatar
MR FACTUALLY ACCURATE FACTSMAN
MR FACTUALLY ACCURATE FACTSMAN

Joined: Tue Jun 26, 2007 10:19 am
Location: Minneapolis
With the plywood I'd say 100# is a safe estimate. Given what you're planning I don't think you have too much to worry about. I assume you're looking into buying casters now? Any decent ones will be fine, the trick is going to be arranging them so things are supported evenly. But I've put well over 100#s on some rather small casters for extended periods and had no problems. You may want to consider a framework of thicker lumber on the underside of the plywood though, since with just plywood there won't be much for any screws to sink into.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Odd question about the FLAGG
PostPosted: Wed Jun 03, 2009 12:36 am 
User avatar
Ripe with kibble / Bojack Strobman
Ripe with kibble / Bojack Strobman

Joined: Tue Jun 26, 2007 10:19 am
Location: !!BEYONDER!!
yep, hypno, you're exactly right.

i'm thinking 8 casters, spaced approx. every two feet or so. between that, and the dress 'skirt' wood around the edge of the plywood, i should have enough bracing to keep the wood from sagging. 3/4" plywood should be enough for the casters to bite, or possibly just a small block of wood glued on for extra depth -- these would also be covered by the wood 'skirt' --

this is going to be awesome....

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Odd question about the FLAGG
PostPosted: Wed Jun 03, 2009 1:26 pm 
User avatar
Plug
Plug

Joined: Tue Jun 26, 2007 10:19 am
Location: Maryland
joemichaels70 wrote:
i'm thinking 8 casters, spaced approx. every two feet or so.
Unless you're building your own wood supports under the deck, you might want to space the casters out according to where the flagg's plastic weight baring supports are.

Also, if you plan on moving this thing around a lot, you might want to think about gluing some of the Flagg parts in place. It just wasn't designed for being moved and I'd worry about what a few bumps in the road might do.

_________________
:hijm70:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Odd question about the FLAGG
PostPosted: Fri Jun 19, 2009 1:10 am 
User avatar
Ripe with kibble / Bojack Strobman
Ripe with kibble / Bojack Strobman

Joined: Tue Jun 26, 2007 10:19 am
Location: !!BEYONDER!!
i know i ask a lot of dimension questions in this forum...

here is proof that i listen & use your responses, all:
Attachment:
flagg platform.jpg
flagg platform.jpg [ 119.09 KiB | Viewed 2842 times ]



note: i stained the plywood blue with craft paints before varnishing -
the wood sucked up the paint/stain at different levels, giving it an organic/wavy look -

oh, and i've stood on this thing -- it's built strong enough to handle 185# + of pure sexy!

and i could skateboard on the casters, if i could find a skate park big enough!

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Odd question about the FLAGG
PostPosted: Fri Jun 19, 2009 1:35 am 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
That looks like a quality base. If you are looking to mount the Flagg (semi) permanently, instead of glue as pluv suggested, I suggest drilling some holes in the base and using zip-ties to hold the Flagg down.

I look forward to what this looks like when it's done, especially since I still need to finalize my eventual Flagg display.

_________________
Visit my new store SW Joes Toys and Displays


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Odd question about the FLAGG
PostPosted: Fri Jun 19, 2009 3:18 pm 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
Looks good.

Maybe I'm just Clutzy, Lazy, and Old...but I never like seeing the Flagg set up on the floor. A. it's too close to feet and sturdy as a Flagg is...it dosn't take to kicking all that well. B. I don't like to get down on the ground to play...a Flagg at waist or chest height is soo much closer to my eyes and I can get my face all in the detail. C. I'm a hypocrite, cuz my flagg is set up on a coffee table draped with an old bed sheet...so it's higher than yours...but lower than I'd say is ideal.

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Odd question about the FLAGG
PostPosted: Fri Jun 19, 2009 4:23 pm 
User avatar
Ripe with kibble / Bojack Strobman
Ripe with kibble / Bojack Strobman

Joined: Tue Jun 26, 2007 10:19 am
Location: !!BEYONDER!!
thanks for the comments & tips -

nova, i understand where you're coming from... however, this is the only spot i'll have for the flagg (if it's ever to see the light of day) -- i put it on casters so i can pull it to the center of the room if someone wants to see or play with the entire structure. otherwise we'll just be seeing the control tower side facing out.

soon i'll have another photo to show you why the flagg is where it is... the flagg platform/display is but 1/9th of the total plan...

:shifty:

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: JoeRoom Development (was: Odd question about the FLAGG)
PostPosted: Fri Jun 19, 2009 4:35 pm 
User avatar
Ripe with kibble / Bojack Strobman
Ripe with kibble / Bojack Strobman

Joined: Tue Jun 26, 2007 10:19 am
Location: !!BEYONDER!!
even though these have been seen before, I thought I would include them in this thread to give a little background on the JoeRoom itself -- the initial before/after photos:

Attachment:
1-a.jpg
1-a.jpg [ 127.1 KiB | Viewed 2822 times ]

Attachment:
1-b.jpg
1-b.jpg [ 113.23 KiB | Viewed 2822 times ]

Attachment:
2-a.jpg
2-a.jpg [ 115.14 KiB | Viewed 2822 times ]

Attachment:
2-b.jpg
2-b.jpg [ 110.17 KiB | Viewed 2822 times ]

Attachment:
3-a.jpg
3-a.jpg [ 89.82 KiB | Viewed 2822 times ]

Attachment:
3-b.jpg
3-b.jpg [ 108.58 KiB | Viewed 2822 times ]

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Odd question about the FLAGG
PostPosted: Fri Jun 19, 2009 4:38 pm 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
Location: East Tennessee
nova wrote:
Looks good.

Maybe I'm just Clutzy, Lazy, and Old...but I never like seeing the Flagg set up on the floor. A. it's too close to feet and sturdy as a Flagg is...it dosn't take to kicking all that well. B. I don't like to get down on the ground to play...a Flagg at waist or chest height is soo much closer to my eyes and I can get my face all in the detail. C. I'm a hypocrite, cuz my flagg is set up on a coffee table draped with an old bed sheet...so it's higher than yours...but lower than I'd say is ideal.


Agreed. Mine sat on the floor for 3 years and I hated it. My mom bought me a 8ft fold-able table for Christmas. It works awesome for the FLAGG, plus it allows for under table storage.

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Odd question about the FLAGG
PostPosted: Fri Jun 19, 2009 5:55 pm 
User avatar
Moderator
Moderator

Joined: Tue Jun 26, 2007 10:19 am
Location: IA
Matthew wrote:
nova wrote:
Looks good.

Maybe I'm just Clutzy, Lazy, and Old...but I never like seeing the Flagg set up on the floor. A. it's too close to feet and sturdy as a Flagg is...it dosn't take to kicking all that well. B. I don't like to get down on the ground to play...a Flagg at waist or chest height is soo much closer to my eyes and I can get my face all in the detail. C. I'm a hypocrite, cuz my flagg is set up on a coffee table draped with an old bed sheet...so it's higher than yours...but lower than I'd say is ideal.


Agreed. Mine sat on the floor for 3 years and I hated it. My mom bought me a 8ft fold-able table for Christmas. It works awesome for the FLAGG, plus it allows for under table storage.


If you have it up on a table, it actually give you more space as well, as a table sits so high you can put rather large vehicles underneath it, or long boxes of Joe comics.

Raise the Flagg!

_________________
TEAM RED LASER 4 Life
bucky, drbindy, Tim 121RVC, alleyviperelite, danielb, DREMEL
harlie, icecreamman, Jogunwarrior, Mysterious Stranger
Oneforceleader, Rambo, ronin, Silent Master, Suburbanator
toy-nutz, Tsunami, Wowboy, pugsley, spin doctor


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: JoeRoom Development (was: Odd question about the FLAGG)
PostPosted: Fri Jun 19, 2009 9:05 pm 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
Location: Under the JoeCustoms JoeCon Booth
Normally I'd say that Smurf blue is a bad color and looks horrible... BUT in this case it works perfectly. Why? It's sky blue and makes for a great backdrop for displaying Joes and their rides. I like it.

The rolling base for the Flagg is brilliant. I'd be rolling that sucker all over the place setting up battles and staging assaults on Cobra bases. Color me jealous.

_________________
I'm pretty sure it's :robocopgun:


Top
 Profile Customs Feedback / Brawlingness  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 105 posts ]  Go to page 1, 2, 3, 4, 5 ... 7  Next

It is currently Tue Nov 26, 2024 8:45 pm (All times are UTC - 5 hours [ DST ])


Who is online

Users browsing this forum: No registered users and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group