Rules    FAQ
User: Guest ( Register )
 
 
 

It is currently Fri Nov 29, 2024 12:21 pm (All times are UTC - 5 hours [ DST ])


Forum rules


  • This section is for honest critique of the work shown here. Members are encouraged to give and accept non-confrontational constructive criticism as well as adoring praise and everything in between.
  • In order to show case everyone's work equally, please post multiple customs on the same day into a single thread. If you have a lot of pictures of your work you may have to add them to a separate post within that thread.
  • Please do not link to a sale thread or to eBay from your critique thread. This section isn't to be used to market your finished work. The Market Place section is better suited for that purpose.



Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 11 posts ] 
Author Message
 Post subject: RC hammer
PostPosted: Sun May 22, 2011 11:21 pm 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
Image
http://img.photobucket.com/albums/v644/ ... G_8436.jpg

Cheap crappy RC Car + Junk Hammer shell ends up like this...but it's a bit boring.


Any thoughts on what kind of Paint Job would make this Pop?

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: RC hammer
PostPosted: Sun May 22, 2011 11:36 pm 
User avatar

Joined: Sun May 25, 2008 9:59 pm
Monster truck tires and overgrown brush bar make it look more like something the Dreadnoks would field.

_________________
Greytech Heavy Industries

If it ain't broke, take it apart and lose some of the pieces. Then, it'll be a custom.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: RC hammer
PostPosted: Mon May 23, 2011 8:57 am 
User avatar
Formerly JFAK075

Joined: Tue Jun 26, 2007 10:19 am
Location: Hawthorne, New Jersey
I've wanted to do an RC project like this. Such a cool idea. No thoughts on the paint job, but I am looking forward to seeing it.

_________________
Check out End of Days- an ongoing Diorama-Story set in the zombie apocalypse.
http://keenansendofdays.blogspot.com/

My customs- http://s1069.photobucket.com/albums/u468/keenan42/


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: RC hammer
PostPosted: Mon May 23, 2011 9:30 am 
User avatar
Code Name: Speed Bump

Joined: Tue Jun 26, 2007 10:19 am
Location: Pittsburgh, PA
Greyryder wrote:
Monster truck tires and overgrown brush bar make it look more like something the Dreadnoks would field.

Agreed. The two-tone green from the Ground Assault set would look pretty cool on it. Look forward to seeing where you go with this.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: RC hammer
PostPosted: Mon May 23, 2011 10:21 am 
User avatar
Plug
Plug

Joined: Tue Jun 26, 2007 10:19 am
Location: Maryland
Because of the blue on the rims I almost think you should use that on the hummer body and make it cobra.

_________________
:hijm70:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: RC hammer
PostPosted: Tue May 24, 2011 9:18 am 
User avatar
RPG Spin Master
RPG Spin Master

Joined: Tue Jun 26, 2007 10:19 am
Location: Security. Status. Escape.
Given the blue on the rims, and your twisted and generally offensive vehicle aesthetic, I point your attention towards the eco striker.

http://www.yojoe.com/vehicles/92/ecostriker/

I mean how much better could it be to have Joe's environmental group tooling around in a giant hummer monster truck with blinged out rims? Just give it the blue and yellow treatment, stick a "Hybrid" sticker on the back, and you're ready to go....

Edit: And you can call it the "Planet Hammer"

- R

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: RC hammer
PostPosted: Tue May 24, 2011 9:45 am 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
Location: Houston Texas
The way that it looks now (and with the addition of a big ole missile launcher) it could be an updated version of the Battle Wagon

http://www.yojoe.com/vehicles/91/battlewagon/

_________________
A closed mouth gathers no foot!

Don't bite your nails after scratching your butt.

Jimmyboy makes no warranties, express or implied, regarding the quality of his humor.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: RC hammer
PostPosted: Tue May 24, 2011 11:54 am 
User avatar
Cool after molding
Cool after molding

Joined: Tue Jun 26, 2007 10:19 am
Location: Wadsworth OH
JFAK075 wrote:
I've wanted to do an RC project like this. Such a cool idea. No thoughts on the paint job, but I am looking forward to seeing it.



If you do, I would avoid the "New Bright" brand of RC vehicles. This truck is a "New Bright" vehicle...I got it for $20 on clearance, and it broke the 1st time I drove it. The post that connects the front wheel to the Steering Link bar snapped right off. There's also no real suspension, throttle and steering are All or Nothing.

Viper wrote:
Greyryder wrote:
Monster truck tires and overgrown brush bar make it look more like something the Dreadnoks would field.

Agreed. The two-tone green from the Ground Assault set would look pretty cool on it. Look forward to seeing where you go with this.


Dreadnoks is a solid idea....I'd lean towards the colors of the Thunder Machine or Air Assault set...Blue, Maroon, and Highlights of Green....Pretty sure I've got 4 of the extra Stun wheel covers from the Dreadnok Stun.


raptor wrote:
Given the blue on the rims, and your twisted and generally offensive vehicle aesthetic, I point your attention towards the eco striker.

http://www.yojoe.com/vehicles/92/ecostriker/

I mean how much better could it be to have Joe's environmental group tooling around in a giant hummer monster truck with blinged out rims? Just give it the blue and yellow treatment, stick a "Hybrid" sticker on the back, and you're ready to go....

Edit: And you can call it the "Planet Hammer"

- R


I knew there was a reason I liked you...Eco Warriors is an awesome idea...now to see if I still have that squirt gun for the Eco Striker.

_________________
Are you interested in my Custom Castings?

Check out what I'm able to do in the Commission's section.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: RC hammer
PostPosted: Tue May 24, 2011 12:40 pm 
User avatar
ARAHddict
ARAHddict

Joined: Tue Jun 26, 2007 10:19 am
Location: The Netherlands
Totally awesome idea, the Hammer hull looks great on top of the RC monster truck!

Tim 121RVC


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: RC hammer
PostPosted: Tue May 24, 2011 6:58 pm 
User avatar
RPG Spin Master
RPG Spin Master

Joined: Tue Jun 26, 2007 10:19 am
Location: Security. Status. Escape.
YO JOE!

The G.I. Joe (R) Planet Hammer (tm) Is the Eco Warriors newest weapon against poisonous arsenal of COBRA (R) and Cesspool (TM)! Its dual v12 Engines and Monster Tires will take it anywhere over trees and brush! Its Anti Tox Napalm shooting cannon will burn away the Rainforest around the Cobra (R) Secret Bio Tox Lab, releasing Cobra's (R) Sludge (tm) safely into the river water! The environment hangs in the balance (tm) - Time to hit it with the PLANET HAMMER (tm)!

- (R)

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: RC hammer
PostPosted: Tue May 24, 2011 8:10 pm 
User avatar

Joined: Mon Oct 22, 2007 7:25 pm
nova wrote:
JFAK075 wrote:
I've wanted to do an RC project like this. Such a cool idea. No thoughts on the paint job, but I am looking forward to seeing it.



{\[If you do, I would avoid the "New Bright" brand of RC vehicles. This truck is a "New Bright" vehicle...I got it for $20 on clearance, and it broke the 1st time I drove it. The post that connects the front wheel to the Steering Link bar snapped right off. There's also no real suspension, throttle and steering are All or Nothing.] Quoted from Nova.


I used the same brand vehicle to RC my Vamp. I admit that New Bright is not the best, but unless you want to spend a few hundred to RC a five to ten dollar toy, they are not bad. I used the 1:24th for the parts. As for suspension, you could always pick up part from your local RC shop to add realistic suspension to the Hammer.


Top
 Profile Customs Feedback / Brawlingness  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 11 posts ] 

It is currently Fri Nov 29, 2024 12:21 pm (All times are UTC - 5 hours [ DST ])


Who is online

Users browsing this forum: Bing [Bot] and 60 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group