Rules    FAQ
User: Guest ( Register )
 
 
 

It is currently Fri Oct 04, 2024 10:36 am (All times are UTC - 5 hours [ DST ])


Forum rules


  • This section is for honest critique of the work shown here. Members are encouraged to give and accept non-confrontational constructive criticism as well as adoring praise and everything in between.
  • In order to show case everyone's work equally, please post multiple customs on the same day into a single thread. If you have a lot of pictures of your work you may have to add them to a separate post within that thread.
  • Please do not link to a sale thread or to eBay from your critique thread. This section isn't to be used to market your finished work. The Market Place section is better suited for that purpose.



Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 17 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: 1:18 Invader, Heavy Siege Tank Tracked (HSTT), WIP
PostPosted: Sun Mar 03, 2013 10:35 pm 
User avatar

Joined: Tue Feb 17, 2009 12:53 am
Location: Northern Virginia
The Heavy Siege Tank (HSTT) was one of several tracked (anti grav assist) invader siege tanks. Far more powerful than their own class of MBT. Human combat vehicles just could not withstand the HSTT's firepower.

HSTT's had multiple armaments. Most notable; it's high yield, energy based, main cannon with a secondary multi-barrel plasma gun. One could wipe out the strongest human tanks in blink of an eye. They had very few weaknesses. However, lacked the speed of MAGAT's but could still attain speeds of 65 MPH in open terrain. They required landing craft to deploy. Then they would convoy into the combat zone. These tanks were heavily armored. But, a well placed hit near the base of the main cannon or forward crew cab would at minimum disable the vehicle.

Invader tanks designated as 'Siege' packed additional firepower. Multiple launch projectile systems (MLPS) were mounted on side or back of the vehicle. HSTT's MLPS was mounted on the rear or top of the turret. The MLPS expanded the function of the tank to provide artillery support. It launches long/medium range rocket fire on various targets (capacity ranged 20 to 100 missiles). They fought human armor units, desimated bases, and rained destruction on large population centers. The HSTT would become most feared by regular military and militia units.

Yesterdays WIP for comparison. Attached 40 round rocket launcher. Rotates and elevates. All rockets are removable.

Image
Image

Today's WIP:

Image
Image
Image
Image
Image

_________________
Chad

Positive Trader Reports:
http://www.warbird-photos.com/gpxd/viewtopic.php?f=3&t=15312&start=650

gliderdwm  30 Sep 10, 22 Oct 10
popeye357 13 Oct 10
Ferrari250GTO 15 Oct 10
xddave 24 Oct 10
ram04 9 Nov 10


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 1:18 Invader, Heavy Siege Tank Tracked (HSTT), WIP
PostPosted: Sun Mar 03, 2013 11:07 pm 
User avatar

Joined: Thu Oct 23, 2008 1:49 pm
Location: Greenfield, WI
Epic!

_________________
Here is a link to my Customs Gallery:

http://s1009.photobucket.com/albums/af217/lronWill/


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 1:18 Invader, Heavy Siege Tank Tracked (HSTT), WIP
PostPosted: Sun Mar 03, 2013 11:22 pm 
User avatar

Joined: Tue Feb 17, 2009 12:53 am
Location: Northern Virginia
Thanks man!

_________________
Chad

Positive Trader Reports:
http://www.warbird-photos.com/gpxd/viewtopic.php?f=3&t=15312&start=650

gliderdwm  30 Sep 10, 22 Oct 10
popeye357 13 Oct 10
Ferrari250GTO 15 Oct 10
xddave 24 Oct 10
ram04 9 Nov 10


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 1:18 Invader, Heavy Siege Tank Tracked (HSTT), WIP
PostPosted: Mon Mar 04, 2013 12:04 am 
User avatar
Snake Staked

Joined: Thu Sep 22, 2011 3:01 pm
Damn. That thing's huge! Looking forward to seeing this finished.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 1:18 Invader, Heavy Siege Tank Tracked (HSTT), WIP
PostPosted: Mon Mar 04, 2013 11:45 am 
User avatar
Plug
Plug

Joined: Tue Jun 26, 2007 10:19 am
Location: Maryland
WOW! That is all.

_________________
:hijm70:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 1:18 Invader, Heavy Siege Tank Tracked (HSTT), WIP
PostPosted: Mon Mar 04, 2013 11:47 am 
User avatar
Special Limited Edition Co-Host / Membership Has Its Privileges
Special Limited Edition Co-Host / Membership Has Its Privileges

Joined: Mon Nov 19, 2007 3:31 pm
Location: Fort Wayne
I'm a big fan, both of this piece and of your work in general. Bravo.

_________________
Kwinn_Lives wrote:
you have now won more JCAs than anyone in the history of the award.

Mysterious Stranger wrote:
You sir are the definition of a Renaissance Nerd... you do it all so damn well.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 1:18 Invader, Heavy Siege Tank Tracked (HSTT), WIP
PostPosted: Mon Mar 04, 2013 12:48 pm 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
wow that is noe impossing mother.........

_________________
__________________________________________________________________________________________
"The Rise of the Purple Laser"
RED LASER FOR LIFE
In the One verse, there is One world, one enemy, One hope,......ONEFORCE!


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 1:18 Invader, Heavy Siege Tank Tracked (HSTT), WIP
PostPosted: Wed Mar 06, 2013 9:54 pm 
User avatar

Joined: Tue Feb 17, 2009 12:53 am
Location: Northern Virginia
Thank you all for the great feedback. Working on the back section of the tank.

_________________
Chad

Positive Trader Reports:
http://www.warbird-photos.com/gpxd/viewtopic.php?f=3&t=15312&start=650

gliderdwm  30 Sep 10, 22 Oct 10
popeye357 13 Oct 10
Ferrari250GTO 15 Oct 10
xddave 24 Oct 10
ram04 9 Nov 10


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 1:18 Invader, Heavy Siege Tank Tracked (HSTT), WIP
PostPosted: Wed Mar 06, 2013 10:39 pm 
User avatar

Joined: Mon May 05, 2008 12:45 pm
Location: COLOMBIA
Another fan here. Somehow this reminded me of the tank that chases the bionic man.

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 1:18 Invader, Heavy Siege Tank Tracked (HSTT), WIP
PostPosted: Fri Mar 08, 2013 12:34 am 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
Location: Winston Salem, NC
Ridiculously awesome thus far. Eager to see how this develops.

_________________
(11:52:13) Python_Viper: yeah, the first day i met BA in person, I slept with him that night

(15:38:26) Tex: jesus deadpool gots some nice junk


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 1:18 Invader, Heavy Siege Tank Tracked (HSTT), WIP
PostPosted: Fri Mar 08, 2013 8:49 pm 
User avatar

Joined: Sun Mar 03, 2013 11:57 am
Location: Ohio
Outstanding!


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 1:18 Invader, Heavy Siege Tank Tracked (HSTT), WIP
PostPosted: Sat Mar 09, 2013 7:58 pm 
User avatar
Donor
Donor

Joined: Sun Aug 23, 2009 12:52 am
This is amazing! I'm really looking forward to seeing more pictures from inside the tank

_________________
Hey visit my Blog and my 1:18 scale wargame :http://gijac.blogspot.com/


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: 1:18 Invader, Heavy Siege Tank Tracked (HSTT), WIP, 7 Apr 13
PostPosted: Sun Apr 07, 2013 8:55 am 
User avatar

Joined: Tue Feb 17, 2009 12:53 am
Location: Northern Virginia
Sorry guys. Not much of an update. Just minor work:

Turret gantry. When completed it will wrap around the back, from door to door.

Some minor detailing. Working on decal overlays and display designs.

Biggest dilemma. Waiting on electronic components from another source. Can't seal up and finish the turret/cab without finishing the lighting/displays. The same with the main barrel. Hopefully the stuff I need will come in next week.

Meantime I'm working on an exciting large scale build. The 1:18 Invader Inter-Atmospheric Craft (IIAC), Zhūróng zhànjiàn (warship). When run into situations where running short on material (electronics especially) I'm going to start working on more 1:18 invader figures, human resistance and civilian figures, and simple custom vehicles.

Image

Image

Image

Image

Image

Image

_________________
Chad

Positive Trader Reports:
http://www.warbird-photos.com/gpxd/viewtopic.php?f=3&t=15312&start=650

gliderdwm  30 Sep 10, 22 Oct 10
popeye357 13 Oct 10
Ferrari250GTO 15 Oct 10
xddave 24 Oct 10
ram04 9 Nov 10


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 1:18 Invader, Heavy Siege Tank Tracked (HSTT), WIP
PostPosted: Sun Apr 07, 2013 9:10 am 
User avatar

Joined: Thu Oct 23, 2008 1:49 pm
Location: Greenfield, WI
Really cannot wait to see this done! Spectacular so far!!

_________________
Here is a link to my Customs Gallery:

http://s1009.photobucket.com/albums/af217/lronWill/


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: 1:18 Invader, Heavy Siege Tank Tracked (HSTT), WIP
PostPosted: Sun Apr 07, 2013 9:32 am 
User avatar

Joined: Wed Nov 09, 2011 10:42 am
Location: Westminster, MD
You definitely pull out all the stops, I must say. I think that gatling gun is from a 12 inch figure, if so, I have been wanting to use a couple of those for a long time, but they are so damn expensive. Looks amazing.

_________________
BLUE LASERS
PURPLE LASERS
Green Laser Sympathizer

Dusty79 wrote:
I can't wait to cut those babies up for parts.


Top
 Profile Customs Feedback / Brawlingness  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 17 posts ]  Go to page 1, 2  Next

It is currently Fri Oct 04, 2024 10:36 am (All times are UTC - 5 hours [ DST ])


Who is online

Users browsing this forum: Bing [Bot] and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group