Rules    FAQ
User: Guest ( Register )
 
 
 

It is currently Sat Nov 30, 2024 7:41 pm (All times are UTC - 5 hours [ DST ])


Forum rules


  • This section is for honest critique of the work shown here. Members are encouraged to give and accept non-confrontational constructive criticism as well as adoring praise and everything in between.
  • In order to show case everyone's work equally, please post multiple customs on the same day into a single thread. If you have a lot of pictures of your work you may have to add them to a separate post within that thread.
  • Please do not link to a sale thread or to eBay from your critique thread. This section isn't to be used to market your finished work. The Market Place section is better suited for that purpose.



Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 395 posts ]  Go to page Previous  1 ... 14, 15, 16, 17, 18, 19, 20 ... 27  Next
Author Message
 Post subject: Re: Marvel Figures - 7/3 Magik on p.16
PostPosted: Mon Jul 04, 2016 10:17 am 
User avatar
HATES Mattel

Joined: Tue Jun 26, 2007 10:19 am
I'm loving Magik, but I'm not seeing any difference to her leg length. To get those legs to proper human proportions the entire section of the calf from the swivel to the second knee hinge has to be thrown out. I reshaped the remaining calf to fit the pin on my Harlequin, and her legs fold and look properly human now. Feet shouldn't be behind one's ass when squatting, Hasbro!

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Marvel Figures - 7/3 Magik on p.16
PostPosted: Tue Jul 05, 2016 2:43 pm 
User avatar
Special Limited Edition Co-Host / Membership Has Its Privileges
Special Limited Edition Co-Host / Membership Has Its Privileges

Joined: Mon Nov 19, 2007 3:31 pm
Location: Fort Wayne
Fun, fun figure. Has a look like she's inspired by Final Fantasy, which is not a bad thing.

_________________
Kwinn_Lives wrote:
you have now won more JCAs than anyone in the history of the award.

Mysterious Stranger wrote:
You sir are the definition of a Renaissance Nerd... you do it all so damn well.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Marvel Figures - 7/16 Ultron 3.0 and a GOTG WIP on p.16
PostPosted: Sat Jul 16, 2016 4:51 pm 
User avatar
Thomas from Missourri

Joined: Tue Jun 26, 2007 10:19 am
Thanks guys. I guess the new Magik design does have a Final Fantasy vibe. Must be the new generation of comic book artists showing their inspirations.

I know I've shown off a couple of movie-inspired Ultron customs here already, but much like the character itself, I can't seem to stop tinkering with the design.

I wasn't unhappy with my evolved Ultron until my son finally saw The Terminator and realized where I'd gotten the base body for it. He basically accused me of being lazy. And since I was still not entirely sold on his height relative to my other movie-inspired figures, I decided to give it another go (at right, next to my original movie Ultron, below):
Attachment:
Ultron.jpg
Ultron.jpg [ 127.72 KiB | Viewed 766 times ]

Here's a shot to show how he fits in height-wise with the some of my other cinematic Avengers customs:
Attachment:
Ultron2.jpg
Ultron2.jpg [ 143.11 KiB | Viewed 766 times ]

And while I'm obsessing over character height, thought I'd share a WIP at what has become my new Great White Whale of customizing. I don't usually show WIPs, but I got several inquiries about how my Blob came together and decided to document my progress on Groot:
Attachment:
iWillBeGroot.jpg
iWillBeGroot.jpg [ 98.06 KiB | Viewed 766 times ]

What do you guys think?


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Marvel Figures - 7/16 Ultron 3.0 and a GOTG WIP on p.17
PostPosted: Sat Jul 16, 2016 5:40 pm 
User avatar

Joined: Mon Oct 07, 2013 3:59 pm
Location: MS
very cool, very large figures!


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Marvel Figures - 7/16 Ultron 3.0 and a GOTG WIP on p.17
PostPosted: Sat Jul 16, 2016 8:02 pm 
User avatar

Joined: Wed Oct 17, 2007 5:13 pm
Location: Stamford, CT
Wow! Looks amazing


Sent from my iPhone using Tapatalk

_________________
http://allthatremainsbeyond.com/


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Marvel Figures - 7/16 Ultron 3.0 and a GOTG WIP on p.17
PostPosted: Sat Jul 16, 2016 9:06 pm 
User avatar
Special Limited Edition Co-Host / Membership Has Its Privileges
Special Limited Edition Co-Host / Membership Has Its Privileges

Joined: Mon Nov 19, 2007 3:31 pm
Location: Fort Wayne
So what's going on there with Groot? Are those BAF parts chopped down to regular legends height? Or some other source of the parts?

_________________
Kwinn_Lives wrote:
you have now won more JCAs than anyone in the history of the award.

Mysterious Stranger wrote:
You sir are the definition of a Renaissance Nerd... you do it all so damn well.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Marvel Figures - 7/16 Ultron 3.0 and a GOTG WIP on p.17
PostPosted: Sun Jul 17, 2016 2:58 pm 
User avatar
Thomas from Missourri

Joined: Tue Jun 26, 2007 10:19 am
Thanks, guys.

drbindy wrote:
So what's going on there with Groot? Are those BAF parts chopped down to regular legends height? Or some other source of the parts?


The Groot parts are off a midnight Chinese, light-up-chest, limited-articulation figure that I grabbed off of eBay for about 6 bucks. It was about half an inch shorter than the actual BAF Groot, but still not worth displaying as-was.

I had an old Legends Namor that I've cannibalized for various parts in the past, and decided to use his torso as the base for a custom because it's so skinny and I know ultimately I'll be building it up some with sculpted effects. I've been cutting down the limbs of the Groot to fit the new height I'm going for, which should be right around 7 inches when completed. I know that will still make him taller than he appears in the movie, but given how big I've seen him in comic and cartoon art, I figure it'll do.

The hardest part so far has been shaping the remaining stumps of Namor limbs to plug into the scaled down Groot donor parts, creating the level of enhanced articulation that I want:
Attachment:
GrootStump.jpg
GrootStump.jpg [ 82.74 KiB | Viewed 715 times ]


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Marvel Figures - 7/16 Ultron 3.0 and a GOTG WIP on p.17
PostPosted: Sun Jul 17, 2016 3:45 pm 
User avatar
Mr. Patience

Joined: Tue Jun 26, 2007 10:19 am
Location: Las Vegas
I love your threads. They always give me stealable ideas.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Marvel Figures - 7/16 Ultron 3.0 and a GOTG WIP on p.17
PostPosted: Tue Jul 19, 2016 1:10 am 
User avatar
Thomas from Missourri

Joined: Tue Jun 26, 2007 10:19 am
gijoey wrote:
I love your threads. They always give me stealable ideas.


Steal away!

Here's a quick update on Groot's progress. Torso sculpting done:
Attachment:
GrooTorso.jpg
GrooTorso.jpg [ 113.26 KiB | Viewed 696 times ]
Attachment:
GrooTorso2.jpg
GrooTorso2.jpg [ 105.21 KiB | Viewed 696 times ]


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Marvel Figures - 7/16 Ultron 3.0 and a GOTG WIP on p.17
PostPosted: Tue Jul 19, 2016 7:08 am 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
Location: Columbus, Ohio... Home of Rip-Cord and Grunt!
Groot is coming along quite nicely! The torso sculpting looks spot on for the tree bark look. I'll be interested in seeing this one finished...

-Todd

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Marvel Figures - 7/16 Ultron 3.0 and a GOTG WIP on p.17
PostPosted: Tue Jul 19, 2016 9:38 am 
User avatar

Joined: Wed Oct 17, 2007 5:13 pm
Location: Stamford, CT
This is looking really nice. I bought a Chinese Groot a while back that has jack articulation, this is giving me all kinds of ideas on what to do with it.

_________________
http://allthatremainsbeyond.com/


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Marvel Figures - 7/16 Ultron 3.0 and a GOTG WIP on p.17
PostPosted: Tue Jul 19, 2016 10:44 am 
User avatar
Special Limited Edition Co-Host / Membership Has Its Privileges
Special Limited Edition Co-Host / Membership Has Its Privileges

Joined: Mon Nov 19, 2007 3:31 pm
Location: Fort Wayne
part of me really wants to do this... the lazy part of me wants to just wait for the comic pack Groot and say GOOD ENOUGH. lol

_________________
Kwinn_Lives wrote:
you have now won more JCAs than anyone in the history of the award.

Mysterious Stranger wrote:
You sir are the definition of a Renaissance Nerd... you do it all so damn well.


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Marvel Figures - 7/16 Ultron 3.0 and a GOTG WIP on p.17
PostPosted: Tue Jul 19, 2016 11:00 am 
User avatar
Plug
Plug

Joined: Tue Jun 26, 2007 10:19 am
Location: Maryland
drbindy wrote:
part of me really wants to do this... the lazy part of me wants to just wait for the comic pack Groot and say GOOD ENOUGH. lol
Ditto, but I'll gladly spectator the crap out of this build.

_________________
:hijm70:


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Marvel Figures - 7/16 Ultron 3.0 and a GOTG WIP on p.17
PostPosted: Tue Jul 19, 2016 12:51 pm 
User avatar

Joined: Tue Jun 26, 2007 10:19 am
SO glad I bashed my Groot bits onto an ML AIM fig - no way I'd want to undertake a sculpting job like that.

Looking awesome so far, Spinny - really looking forward to the finished product.

And that Drax is sweet! - are those IM legs? And where's the belt from?

_________________


Top
 Profile Customs Feedback / Brawlingness  
 
 Post subject: Re: Marvel Figures - 7/16 Ultron 3.0 and a GOTG WIP on p.17
PostPosted: Fri Jul 22, 2016 12:41 am 
User avatar
Thomas from Missourri

Joined: Tue Jun 26, 2007 10:19 am
Chief wrote:
And that Drax is sweet! - are those IM legs? And where's the belt from?


Those are indeed IM legs and a DCIH fodder figure donated the belt. Maybe Arsenal?

Thanks to you and all for the words of encouragement on Groot. They gave me much-needed energy to push through and (hopefully) finish him this week:
Attachment:
Groot.jpg
Groot.jpg [ 41.17 KiB | Viewed 638 times ]

I'm quite pleased with how he turned out. And height-wise I think he's pretty much exactly where I want him to be:
Attachment:
GrootOfTheGalaxy.jpg
GrootOfTheGalaxy.jpg [ 85.07 KiB | Viewed 638 times ]

What do you guys think?


Top
 Profile Customs Feedback / Brawlingness  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 395 posts ]  Go to page Previous  1 ... 14, 15, 16, 17, 18, 19, 20 ... 27  Next

It is currently Sat Nov 30, 2024 7:41 pm (All times are UTC - 5 hours [ DST ])


Who is online

Users browsing this forum: No registered users and 47 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group